Get a quote

HV-125-BWP AIR BRAKE DRIVING SIMULATOR + Add to wishlist

52877-BWP

The ConsuLab HV-125-BWP is everything you’ve always dreamed about when teaching air brakes systems. Imagine being able to take the entire class out for a road test and watch live data on a scan tool and see what happens when you drive on dry pavement, during full throttle acceleration and a panic stop. Simulate a drive on an icy road and start to lose control, and you will get to demonstrate how the ABS and ESP functions. Students get to hear, feel and see how all the electronic control valves react during these ABS ESP and ATC events. You can demonstrate trailer sway, you can demonstrate traction control events. The trainer is built to be used as a live driving simulator in front of a whole class as well as for learning the foundation air brake system, performing electrical and pneumatic diagnosis with the aid of fault boxes, with optional defective components. The trainer has been designed around the FMVSS121 standard and allows students perform their pre-trip inspections. All components are D.O.T. approved. Optional foundation brake wheel ends with a drum front axle, spring brake disc and spring brake drum configuration give full coverage of how the mechanical foundation section of the brake’s functions. Students can see the S-cams move, you can watch the slack adjusters adjust, you can over or under adjust the brakes and see the results on the foundation disc and drum cutaways.

 

Educational Advantages

  • The learner can easily observe the various functions of the trainer and the interaction of the tractor and trailer
  • The air brake trainer fits through standard classroom doorways and is simple to set up
  • The wheel speeds for all wheels are shown on individual screens throughout the trainer
  • The operator controls are positioned so that the operator does not obscure the operation of the system
  • Many of the components are mounted to the board using thumbnuts so that the components may be removed without any tooling
  • Faulted components are supplied that can be installed for diagnosis training

 

Applications

  • The tractor system is a Bendix EC-60 premium system configured as 4S4M, this means 4 sensors and 4 modulator valves
  • The trailer system is a complete standalone system with Wabco RSSplus, ABS and rollover protection electronic stability control
  • The Bendix AD-IS air dryer is used that includes a wet tank and safety valve for over pressure protection. This means that there are just two primary and secondary tanks for the main system
  • The primary and secondary tanks have drain valves. All tanks are equipped with safety valves set at the industry standard 150psi

 

Optional Equipment

  • 52890-1 HV-124-DISC, Trailer Disc with Spring Brake for HV-125
  • 52890-2 HV-124-DRUM, Trailer Drum with Spring Brake for HV-125
  • 52890-3 HV-124-FDRUM, Front Tractor Drum with no Spring Brake for HV-125
  • 30255-7 Set of Breakout Boxes with T-Harnesses for Premium
  • 30256 Set of Defective Components for HV-125
  • 93788 NEXIQ USB Link 2 Communication Interface

You must be connected to access this section. Please register or, if you already have an account, login.

You must be logged in to write a review about our products.

 

Testimonials

The training aids that we have from Consulab are excellent, and are much more detailed than the other companies that offer similar products. I use them while teaching in my class, and the students really understand when the cutaways are right there, rather than just a picture in a book. Your Sales and Service have been great!

Marc Michaud, Lee County High Tech Central

Partners

   
 
All Partners

Consulab

Consulab manufactures educational training materials adapted to meet the needs of technical and vocational schools in the fields of transportation technology electrical engineering.

Learn More

Contact

+1 (800) 567-0791 . 8pm - 5pm EST

4210 Jean-Marchand Street
Quebec City, QC . Canada, G2C 1Y6

Email info@consulab.com

More Information