Get a quote

EC-140H, CUTAWAY TOYOTA PRIUS HYBRID DRIVE TRAIN + Add to wishlist

52944

The EC-140H Cutaway Toyota Prius Hybrid Drive Train is a training system designed specifically for teaching how a typical hybrid drive train operates. The trainer consists of all cutaway drive train components from a Toyota Hybrid Synergy Drive system including:

  • ICE (internal combustion engine)
  • Torque damper assembly
  • MG1 (motor/generator #1)
  • Planetary gearset (power split device)
  • MG2 (motor/generator #2)
  • Transaxle
  • Inverter
  • HV (high voltage) battery (non-functional)

 

The ICE, MG1, MG2 and differential output/drive wheels are driven with external electric motors via connecting chains. This design allows the demonstration of eight of the possible hybrid operating modes. All components are cutaway to allow clear student visual learning.

 

Educational Advantages

  • Clear cutaways allow clear student visualization of hybrid drive train components.
  • Students can observe the eight basic operational modes of a typical hybrid drive train.
  • Completely safe. No high voltages normally associated with hybrids are used.
  • Clear protective plexiglass enclosure for all rotating components.
  • Intuitive control panel/dashboard showing power flow, component speed, and direction of rotation.
  • Three individual motors for ICE, MG1 and MG2.
  • Allows students to observe the continually variable ratio function using a simple planetary gear set (power split device) and varying input speeds.


Applications:

  • 2010-2015 Toyota Prius
  • 1.8L 2ZR-FXE 4 cylinder with VVT-i Atkinson cycle with Hybrid Synergy Drive


Standard Equipment and Features

  • OEM components, wiring, connectors and wire colors
  • 120 VAC 60 Hz Power Supply with master ON/OFF switch used to power the EC-140H Hybrid trainer. Includes 1.5A protection fuse
  • Mobile stand constructed of 2” (5cm2) tubular steel equipped with four 5” (12.7cm) phenol casters (2-fixed and 2-swivel w/locks)
  • Control panel
  • Driving modes including:
    - Reverse
    - Engine start
    - Low speed and low acceleration (stealth)
    - Normal drive (cruise)
    - High speed and full-throttle acceleration
    - High speed energy recirculation
    - Coasting
    - Regenerative braking
  • Drive train information section including a battery charging lamp, a MG2 regeneration lamp, a steady state lamp, a MG1 regeneration lamp, an engine cold temperature lamp, a battery voltage display, a MG2 RPM display, a vehicle speed display, a MG1 RPM display, an engine RPM display, two opposite rotation LED indicators, two system main relay control LED indicators and a drive train schematic diagram
  • Accelerator pedal
  • Brake pedal
  • Emergency panic disconnect button
  • Non-functional
  • HV battery pack

You must be connected to access this section. Please register or, if you already have an account, login.

You must be logged in to write a review about our products.

CUTAWAY TOYOTA PRIUS HYBRID DRIVETRAIN



 
 

Testimonials

I got the half car out of the crate and working yesterday and today I had my Level 3 Electronic Climate Control diagnostics lab using it. This teaching aid is great! The workmanship and design is excellent and it is just perfect for the Level 3 curriculum, including the upcoming changes. We were fortunate that the IPro scan tool we received from the Uniselect donation communicates quite well with the Audi CAN bus system. The Audi also has the electronically controlled, clutchless compressor which is covered in our theory classes so it's a good reinforcement to be able to see it in action, manipulate it and communicate with it. I am very pleased with the quality and applicability of our ConsuLab products (including the engine/AC bench we got recently). They allow me to teach up to 8 students in great detail, whereas only one or two at a time can be involved in a full car. I am looking forward to the imminent arrival of our AC board. Thanks for your excellent insight of design and quality of manufacturing.

Prof. Thomas Brown, Centennial College

Partners

   
 
All Partners

Consulab

Consulab manufactures educational training materials adapted to meet the needs of technical and vocational schools in the fields of transportation technology electrical engineering.

Learn More

Contact

+1 (800) 567-0791 . 8pm - 5pm EST

4210 Jean-Marchand Street
Quebec City, QC . Canada, G2C 1Y6

Email info@consulab.com

More Information