Get a quote

EM-145S-3 ENGINE STAND w/Starting Station - Toyota 1.8L + Add to wishlist


The Toyota engine on a swivel stand is designed for student instruction and practice covering engine mechanical inspection, disassembly, measurement and reassembly. The engine is securely mounted to a heavy duty rotating device equipped with an automatic lock to allow full 360 degree rotation. A steel mounting plate is used for engine mounting that allows full access for rear main seal and flywheel service. Each engine comes equipped with a transmission flywheel (manual or automatic). The engine starting station contains all components and systems necessary for the starting and running of the Toyota engine. All necessary engine systems connections are provided to allow live operation of each swivel engine stand.


Educational Advantages

  • Accessibility of engine components is enhanced by not having the requirement of whole vehicles in the shop
  • Ability to verify proper engine systems operation before and after engine repair
  • Provides a single starting station that can be used with multiple engine stands
  • All rotating components are covered with safety shields or guards to prevent injuries
  • Continuity of subject matter is provided by students working on identical engines
  • Multiple NATEF tasks in the Engine Repair area can be performed on this product


  • Toyota 1.8L, 2006+ 

Standard Equipment and Features

The swivel engine stand (35000D) comes equipped with:

  • Heavy duty automatic locking engine rotating device (hand crank)
  • Included drip pan with drain under engine
  • Full access to all internal and external engine components
  • Quick connect fittings for fuel lines
  • OEM Starter and alternator
  • OEM Fuel injectors and throttle body
  • OEM Engine management sensors
  • Sequential fuel injection with electronic ignition
  • OEM COP (Coil On Plug) Ignition system
  • Application specific heavy duty steel frame
  • 5” Phenol casters (two fixed & two swivel with locks)
  • Powder coated acrylic enamel finish
  • Custom machined engine mounting plate designed for full access for flywheel, crankshaft and rear main oil seal service procedures
  • Equipped with a transmission flywheel (manual or automatic)


The starting station (35008B) comes equipped with:

  • Vehicle VIN number matching all included components
  • OEM color matched wiring and connecters
  • Quick connect fuel lines for easy assembly/disassembly
  • Fuel tank with OEM style fuel cap suitable for EVAP testing
  • Fuel tank has OEM fuel pump and sending unit
  • OEM functional EVAP system with test port
  • OEM Catalytic converter
  • OEM Radiator and hoses
  • OEM Instrument cluster with OEM key
  • OEM Anti-Theft system
  • OEM Waste spark ignition system
  • PCM break out box with 4mm test point receptacles
  • OBDII DLC (data link connecter) for scan tool hookup
  • 12V battery
  • Automatic battery charger
  • Emergency stop button
  • Comes with only one OEM key


The swivel engine stand and the starting station are also available seperately.



  • EM-250 Manual Fault Box for Engine Performance (52575)
  • EM-250-2 Electronic Programmable Fault Box (52931)
  • EM-1200-145 Vinyl Dust Cover (24357)
  • EM-140-11 Instrument Panel Protection (52905)
  • EM-140-20 Scanner Shelf (53147)
  • EM-140-21 Secondary OEM Key (53150)
  • EM-140-09 Coolant Flow Sight Glass (52910)

You must be connected to access this section. Please register or, if you already have an account, login.

You must be logged in to write a review about our products.



I got the half car out of the crate and working yesterday and today I had my Level 3 Electronic Climate Control diagnostics lab using it. This teaching aid is great! The workmanship and design is excellent and it is just perfect for the Level 3 curriculum, including the upcoming changes. We were fortunate that the IPro scan tool we received from the Uniselect donation communicates quite well with the Audi CAN bus system. The Audi also has the electronically controlled, clutchless compressor which is covered in our theory classes so it's a good reinforcement to be able to see it in action, manipulate it and communicate with it. I am very pleased with the quality and applicability of our ConsuLab products (including the engine/AC bench we got recently). They allow me to teach up to 8 students in great detail, whereas only one or two at a time can be involved in a full car. I am looking forward to the imminent arrival of our AC board. Thanks for your excellent insight of design and quality of manufacturing.

Prof. Thomas Brown, Centennial College


All Partners


Consulab manufactures educational training materials adapted to meet the needs of technical and vocational schools in the fields of transportation technology electrical engineering.

Learn More


+1 (800) 567-0791 . 8pm - 5pm EST

4210 Jean-Marchand Street
Quebec City, QC . Canada, G2C 1Y6


More Information