Obtenir un devis

Utilisation de l'oscilloscope en classe + Ajouter à une liste de souhaits

TT2

Cette formation n'est actuellement offerte qu'en anglais.

 

This class will demonstrate how to obtain and evaluate numerous DSO signal waveforms obtained from common engine input sensors (APP, MAF, MAP, IAT, ECT, HO2S, etc),  output actuators (ignition coil, fuel injector, relays, etc), CAN Bus signals, fuel pumps, and many others.  Each attendee will have their own scope to use during the class and “live” signals obtained from training aids will be sent out to them for adjustment, interpretation and evaluation.   “Hands-on” learning has proven to be one of the best methods of comprehension and this class will primarily be “hands-on”.  Attendees will be given a class booklet.
The DSO is rapidly becoming an essential tool for automotive systems diagnosis due to the speed of many signals on vehicles today. The DMM (Digital Multi-Meter) can only do so much. This class covers the basic setup and use of a DSO to capture wave forms. Even if you have never had a scope in your hands or classroom this is the class for you. Attendees will have scopes to work with and you will be able to capture wave forms sent by the instructor. Class provides ideas and strategies for teaching DSO in your classroom. A full color hand out is included.
This class is for instructors who have little or no scope experience and/or for those instructors who own a scope but do not use it for any number of reasons.  Topics covered are: advantages of a scope, scope operation, time/voltage adjustments, trigger types, different waveforms, and many other things.  This is a “hands-on” class where attendees will have a scope to work with during the class.  A full class handout will be included.   Class attendance to be limited to a maximum of 30.

 

INTRODUCTION TO THE DSO (DIGITAL STORAGE OSCILLOSCOPE)
The digital storage oscilloscope (DSO) is rapidly becoming an essential tool with today’s vehicles and increasing electronic technologies.  Some electrical signals are impossible to properly diagnose without a scope.  The scope is often a very misunderstood and an “unknown” for many instructors, students and even technicians.

This seminar will present basic information on the automotive oscilloscope (DSO) including:
1- Limitations of other diagnostic test equipment (test lights, logic probes, DMM’s, graphing meters and scan tools)
2- Why you should learn how to use an oscilloscope
3- How to setup and use a scope using controls and adjustments
4- Entry level scope pattern set up and interpretation

Attendees do not have to have any prior experience with scopes to attend this class.  Class is intended to present information and reasons why the oscilloscope is becoming almost an essential and necessary diagnostic tool.    Attendees may wish to bring their laptop to class.  There will be some “hands-on” work with provided oscilloscopes and created signals to evaluate.   An extensive class handout will be provided and will also be made available for free download.  It does not have to cost a fortune to purchase and learn how to use a DSO.

Vous devez être connecté pour écrire une critique de nos produits.

 

Témoignages

Nous connaissons la société ConsuLab depuis plusieurs années et par la présente, nous sommes fiers de recommander cette société à tous ceux et celles qui voudraient faire l’acquisition d’équipements d’ateliers ou de laboratoires fabriqués et/ou revendus par eux. ConsuLab joue un rôle important à titre de fournisseur auprès de nos centres de formation professionnelle. La société ConsuLab a remporté plusieurs appels d’offres dans des secteurs tels que : appareils électroniques, équipement motorisé, automates programmables, plomberie, climatisation, etc. Les produits et services offerts par la société sont toujours de très bonne qualité et rencontrent fidèlement nos hauts standards de sélection. Leur renommée pour la qualité du travail en ce qui concerne l’installation et la formation sur l’utilisation de l’équipement n’est plus à faire. ConsuLab est une entreprise très reconnue dans notre milieu et même à des niveaux supérieurs sur la scène internationale

Hélène Fournier, conseillère aux ressources matérielles, Fédération des commissions scolaire du Québec

Partenaires

   
 
Voir les partenaires

Consulab

Consulab fabrique des matériaux de formation pédagogiques adaptés pour répondre aux besoins des écoles techniques et professionnelles.

En apprendre plus

Contact

+1.800.567.0791 . 8h - 17h EST

4210 rue Jean-Marchand
Quebec, QC . Canada, G2C 1Y6

Courriel info@consulab.com

Plus d'information