The ConsuLab CL-1918-3S trainer has been developed to teach modern automotive lighting systems through student led learning exercises where students develop their understanding of the system through the physical wiring all circuits. The learning exercises are developed at three levels to allow students to expand their skills. The product is used for teaching Ohm’s law, basic circuits, advanced circuits, relay controlled, power side and ground side-controlled circuits, and there is an included fault box with 12 real world faults that include open circuits, short circuits, high resistance circuits that will require voltage drop testing to verify, ground faulted circuits and more. The trainer is configured with 4mm wiring sockets and all wiring is completed using the 4mm jumper wires. There are also 2mm test sockets located throughout the system to allow testing of key points in the circuits.
All faults can be tested and found by the student from the front side of the panel using the combination of 4mm and 2mm sockets. All components on the trainer have been chosen to maximize teaching value and provide a robust environment where your students can learn without a fear of damaging the product. All connection points are protected against erroneous wiring. The ConsuLab CL-1918-3S Single-sided Automotive Lighting System Trainer utilizes the “Moduponent®” design feature which allows unlimited expansion capabilities. A Moduponent® consists of a clear Plexiglas sheet with components, wiring and socket test points attached. The Moduponent® is attached to the trainers using disconnect fasteners which allows easy adaptation and configuration for different applications. The product is available both single (CL-1918-3S) or double sided (CL-1918-3D). Each side is considered an discrete workstation and is designed to have no affect on the opposing side. Typically, 2 students are assigned per workstation. This means a double-sided trainer can occupy 4 students at a time.
If you have an existing ConsuLab 1918 series product (CL-1918, HV-1918, LV-1918, MP-1918) you can upgrade to this trainer by purchasing an upgrade kit that includes all three Moduponent®, a kit of jumper wires along with a power supply. All 1918 series panels and products are interchangeable and can fit on any 1918 series upright or tabletop/wall mount stand. The product is available with an upright stand CL-1918-10 or a tabletop/wall mount stand CL-1918-10S. The upright stand includes wire holders and a drawer for each side and the power supply is integrated into the trainer. The stand is made of steel and is powder coated and has 4 swivel casters with 2 locking casters. The upright stand is made of steel and powder coated and has fixation points for wall mounting. There are removable feet for use as a tabletop unit.
You must be logged in to write a review about our products.
The ConsuLab CL-1918-3 is our newest automotive lighting system trainer. Students can build a complete automotive lighting system. This trainer has a programmable fault box that allows instructor to insert from 1 to 12 faults for student troubleshooting practice.
The training aids that we have from Consulab are excellent, and are much more detailed than the other companies that offer similar products. I use them while teaching in my class, and the students really understand when the cutaways are right there, rather than just a picture in a book. Your Sales and Service have been great!Marc Michaud, Lee County High Tech Central
Consulab manufactures educational training materials adapted to meet the needs of technical and vocational schools in the fields of transportation technology electrical engineering.Learn More
+1 (800) 567-0791 . 8pm - 5pm EST
4210 Jean-Marchand Street
Quebec City, QC . Canada, G2C 1Y6