Get a quote

Single-sided Hydraulics Trainer with Troubleshooting + Add to wishlist

FP-MF102S-H-TS

The FP-MF102S-H-TS Single-sided Hydraulics Trainer has the same superb capability as the FP-MF102S-H model for teaching a course in basic through advanced hydraulics. However, an extensive component package has been added to increase its capability to include a comprehensive course in troubleshooting hydraulic components and systems.

 

Educational Advantages

  • Allow students to:
    ○ Teach a complete course in basic and advanced hydraulics
    ○ Troubleshoot hydraulic components and systems
    ○ Activate one or more switches which instantly transforms one or more “healthy” components into one or more worn components
  • *Include:
    ○ The same components as the FP-MF102S-H model
    ○ Troubleshooting package
    ○ Optional load-sensing and plug-n-play modules
       * Depending on model specifications

 

Components Included

  • Pump (1) - Axial piston-type, variable volume, pressure-compensated; 3.78 Lpm (1.0 GPM); 69 bar (1000 PSI); adjustable pressure compensator; adjustable flow
  • Electric motor (1) - Single-phase; 115V; TEFC; 1750 RPM; C-face; thermal overload protection
  • Electric motor on/off switch (1) - Lockout/tagout mechanism; thermal overload protection with manual reset
  • Hydraulic reservoir (1) - capacity 17 liter (4.5 gallon)
  • Filtration - 10 micron, spin on/off element w/bypass gauge
  • Directional control valves - five (5) total:
    ○ One (1) DO3-type; tandem-center; 3-position; 4-way; spring-centered; solenoid-controlled; 24V coils. Also includes sandwich-mounted, dual, knob-adjustable flow control valves
    ○ Two (2) DO3-type; closed-center; 3-position; 4-way; spring-centered; solenoid-controlled; 24V coils. Also includes sandwich-mounted, dual, knob-adjustable flow control valves
    ○ One (1) DO3-type; float-center; 3-position; 4-way; spring-centered; solenoid-controlled; 24V coils. Also includes sandwich-mounted, dual, knob-adjustable flow control valves
    ○ One (1) Monoblock type valve; cylinder spool; 3-position; 4-way; spring-centered; hand-lever operated w/pressure relief valve
  • Pilot-operated pressure relief valve (1) w/knob adjustment
  • Direct-operated pressure releif valve (1) w/knob adjustment
  • Sequence valve (1) w/knob adjustment
  • Pressure reducing valve (1) w/knob adjustment
  • Counterbalance valve (1) with internal reverse flow check w/knob adjustment
  • Needle valve (1) w/knob adjustment
  • Flow control valve (1) w/knob adjustment
  • Pressure-compensated flow control valve (1); restrictor-type; reverse flow bypass; w/knob adjustment
  • Check valve (1) w/knob adjustment
  • Pilot-operated check valve (1) w/manual override
  • Cylinder (1) - single-rod; double-acting; 36 cm (14”) stroke
  • Cylinder (1) - double-rod; double-acting; 36 cm (14”) stroke; w/load engage/disengage mechanism
  • Motor (1) - bi-directional; gear-type; w/infinitely variable torque capability
  • Flow meters (2); 7.56 Lpm (0-2.0 GPM)
  • Tachometer (1) - digital-type; panel-mount; hydraulic motor shaft speed
  • Ammeter (1) - analog-type, panel-mount
  • Dual scale temperature gauge (1) - digital-type; panel-mount; upper: oil temperature; lower: ambient temperature
  • Stopwatch (1) - digital, self-retractable
  • Pressure gauges (3) - 103 bar (0-1500 psi); psi and bar scales; 6.35 cm (2.5”); glycerine-filled; Bourdon tube type; w/flat-face type quick-connect/disconnect type valves
  • Load - 45 kg (100 lb); Engage/disengage with mechanical latch. Entire weight is contained within a transparent safety enclosure
  • Hose storage caddy (1) - stow-away/swing-out
  • Hoses (6) - 61 cm (24”); SAE 100-R1; w/flat-face type quick-connect/disconnect type valves
  • Hoses (12) - 102 cm (40”); SAE 100-R1; w/flat-face type quick-connect/disconnect type valves
  • Hose extenders (2) w/flat-face type quick-connect/disconnect type valves
  • T’s (6) w/flat-face type quick-connect/disconnect type valves
  • Panel-mounted switches (17), which transform the following components from normal operating mode to worn mode for diagnostics teaching and learning:
    ○ Double-rod, double-acting cylinder
    ○ Direct-operated pressure relief valve
    ○ Pilot-operated pressure relief valve
    ○ Sequence valve
    ○ Counter-balance valve
    ○ Pressure-reducing valve
    ○ Pilot-operated check valve
    ○ Check valve
    ○ Directional control valves:
         - DO3-type; open-center; 3-position; 4-way; spring-centered; solenoid-controlled; 24V coils
         - DO3-type; closed-center; 3-position; 4-way; spring-centered; solenoid-controlled; 24V coils
         - DO3-type; open-center; 3-position; 4-way; spring-centered; solenoid-controlled; 24V coils
         - DO3-type; tandem-center; 3-position; 4-way; spring-centered; solenoid-controlled; 24V coils
    ○ Bi-directional motor
    ○ Pump
    ○ Directional control valve solenoid current fault
  • Pressure/leak test pump w/quick-connect/disconnect valve (1)
  • Student workbook (1)
  • Instructor manual (1)
  • Classroom CD-ROM module (1)

You must be logged in to write a review about our products.

MF102-TSE Interactive Hydraulic Training System



Find out more about the different FP-MF102 training systems available.

 
 

Testimonials

Please let everyone know the C-12 trainers are working great, they are a big hit with all the top brass when they stop by for a site visit. The students love that lab portion they all really seem to understand the Cat systems more at the end than when they  rst get to class. You can see that light bulb go off in their head after the  rst couple of bugs. Thanks!

CM1(SCW) Ingram, Mickey, CM Advanced School Instructor, NCTC Gulfport, MS

Partners

   
 
All Partners

Consulab

Consulab manufactures educational training materials adapted to meet the needs of technical and vocational schools in the fields of transportation technology electrical engineering.

Learn More

Contact

+1 (800) 567-0791 . 8pm - 5pm EST

4210 Jean-Marchand Street
Quebec City, QC . Canada, G2C 1Y6

Email info@consulab.com

More Information