Get a quote

ED-8000 Advanced Instrumentation and Control Trainer + Add to wishlist


The Advanced Instrumentation and Control Trainer was developed so as to enable students to practice the notions of instrumentation, regulation, control and automation of continuous process. The trainer also allows the students to become familiar with real process in permitting them to connect the different components of the system, initiate different calibrations and set up tuning parameters. The strategies can be modified and the system also permits cascade control, feed-forward control and other control strategies. The unit is mounted, inspected and delivered to be used immediately. The different educational aspects are taken into consideration during the conception, as well as assuring that the final assembly will be easy to move, sturdy, attractive, safe, flexible, and versatile.


The conception itself was designed in close collaboration with technical college professors and technicians from industries. The choice of processes, loops and their static and dynamic characteristics (time constants, time delays, process gains) were all made carefully.


The system is composed of 3 loops:

  • Flow
  • Level
  • Pressure


Process Concept

The system consists of pumping water into a reservoir, and recycling this water. Using a very quiet pump, water from a reserve is pumped into a reservoir (30 inches) by way of a control valve, which control the level if the system is in a single loop. The output of this reservoir discharges into a reserve and returns to the pump.


The advanced trainer contains 3 loops (flow/level/pressure), allowing the students to become familiar with:

  • Level measurement with Ohmart Vega by guided wave radar
  • Pressure with ABB transmitter to the pump outlet
  • Control valve Badger Meter with ABB positionner
  • Variable speed pump drive with ABB (ACS350)
  • Standard signal 4-20 mA dc
  • Calibration
  • Control modes: ON/OFF, P. PI, PID
  • Tuning
  • Loop control start-up
  • Single loop



Option 1: Temperature Control Loop with Heating
A temperature control loop with heating only. We could adjust the set point to 30 or 35 degrees but it will be impossible to cool the water. We will have to wait for the water cool by itself. This option is easy and economic. It includes a RTD, thermo well, temperature controller with universal input and 4@20mA output, breaker, SCR and heating wire. If you want, we could remove the controller and you will control this loop by your PLC.


Option 2: Temperature Control Loop with Heating and a Cooler
The same temperature control loop as describe in the option #1, but adding a cooler. This cooler will have an ON/OFF control. It will be possible to start it with your PLC to cool the water and add a disturbance in the loop.


Option 3: Real Heat and Cooling Control
Finally, having a real heat and cooling control loop. The same temperature control loop as describe in the option #1 and adding a cooler with a 4@20mA input. You will have to program in your PLC a heat/cool strategy with 2 outputs. One will be sent to the heater, and the other to the cooler — we will use a 3 way valve with a intelligent positioner.


Laboratory Experiments Supplied
The assembly has been designed to meet college and university curriculum requirements. It deels with:

  • Process control
  • Automatic control
  • Process measurement;
  • Final control devices
  • Industrial processes
  • Open and close loop
  • Cascade control and feed-forward control

You must be logged in to write a review about our products.



Nous connaissons la société ConsuLab depuis plusieurs années et par la présente, nous sommes fiers de recommander cette société à tous ceux et celles qui voudraient faire l’acquisition d’équipements d’ateliers ou de laboratoires fabriqués et/ou revendus par eux. ConsuLab joue un rôle important à titre de fournisseur auprès de nos centres de formation professionnelle. La société ConsuLab a remporté plusieurs appels d’offres dans des secteurs tels que : appareils électroniques, équipement motorisé, automates programmables, plomberie, climatisation, etc. Les produits et services offerts par la société sont toujours de très bonne qualité et rencontrent fidèlement nos hauts standards de sélection. Leur renommée pour la qualité du travail en ce qui concerne l’installation et la formation sur l’utilisation de l’équipement n’est plus à faire. ConsuLab est une entreprise très reconnue dans notre milieu et même à des niveaux supérieurs sur la scène internationale.

Hélène Fournier, conseillère aux ressources matérielles, Fédération des commissions scolaire du Québec


All Partners


Consulab manufactures educational training materials adapted to meet the needs of technical and vocational schools in the fields of transportation technology electrical engineering.

Learn More


+1 (800) 567-0791 . 8pm - 5pm EST

4210 Jean-Marchand Street
Quebec City, QC . Canada, G2C 1Y6


More Information