Get a quote

CL-1910 Basic Electricity - 60Hz + Add to wishlist

50622

The ConsuLab CL-1910 Basic Electricity trainer has been designed as an aid in teaching electricity while working through a set of introductory experiments. All the experimental components are kept in a steel cabinet divided in two sections. These can be swung open on a hinge to provide a large work space when the experiments are in progress. The components used in the experiments – resistors, capacitors, coils, switches, etc. – are mounted on clear plastic Moduponents®. These are marked with the component symbols and can readily be installed in groups in the trainer case, as required for a particular experiment. Requires a 120V 60Hz circuit.

 

Educational Advantages

  • Deals with basic principles in electricity
  • Study of electrical components and circuits 
  • OEM components mounted on moduponents®

 

Experiment Subjects List

  • DC voltage
  • DC current
  • AC voltage
  • AC current
  • Using an ohm meter to measure resistance
  • Continuity testing
  • Measuring AC current in a series circuit
  • Ohm's law
  • Kirchoff's theorem
  • Power in series circuits
  • Calculating resistance from voltage and current
  • Voltage dividers
  • Testing series circuits
  • Voltage and current in parallel circuits
  • Determining resistance in a parallel circuit with an ohm meter
  • Measuring power in a parallel circuit
  • Series parallel network
  • The resistance bridge
  • Adding resistance to a voltage divider
  • Testing series parallel circuits
  • The magnetic effect of current in a conductor
  • Current induced in a conductor
  • Mutual induction
  • Operation of a solenoid
  • Operation of a transformer
  • Voltage ratios of a transformer
  • Power of a transformer
  • Testing a transformer
  • Capacitors in a DC circuit
  • Time constant in resistance capacitance circuits
  • Capacitors connected in series
  • Capacitors connected in parallel
  • Capacitors in AC circuits
  • Using a thermistor to regulate the current in a circuit
  • Heat and resistance
  • Temperature sensitive circuits
  • Alarm circuit triggered by temperature
  • Operation of a thermostat
  • Overload relay in a circuit
  • Half-wave rectifier
  • Halfwave rectifier with filter capacitor
  • Starting a motor with a switch
  • Basic motor control circuit
  • Motor control circuit with indicator light
  • Reversing a motor
  • Motor control circuit using temperature sensing
  • Controlling the speed of a universal motor
  • Controlling the speed of and reversing a universal motor
  • Motor jogging using a selector switch
  • Reversible starter

 

List of Components Included

  • Cabinet CL-1011-01, removable dual panels
  • Lamp with socket, No 1004
  • Storage box for accessories
  • Magnetic compass, 20 mm
  • Power cord, 120V outlet, 220V outlet
  • Bulb, No 45
  • Bulb, No 47
  • Bulb, No 49
  • Bulb, No 53
  • Bulb, 120 V, 40 W
  • Magnet, 9 cm
  • Patch cord set, 12 blue, 25 cm / 10 yellow, 50 cm
  • Round steel rod, 10 cm
  • AC ammeter Moduponent®, CL-832-01 (0-1 A AC)
  • Ceramic receptacle Moduponent®, CL-832-02
  • Rheostat Moduponent®, CL-832-03 (225 Ω, 50 W)
  • Relay Moduponent®, CL-832-04 (D.P.D.T., 12V AC coil)
  • Cells with holders Moduponent®, CL-832-05, type D
  • Toggle switch Moduponent®, CL-832-06, DPDT
  • Buzzer and selenoid Moduponent®, CL-832-07
  • Push-button set Moduponent®, CL-832-08
  • Transformer Moduponent®, CL-832-09 (115/12.6 V AC)
  • Resistance set Moduponent®, CL-832-10 (8)
  • Receptacle set Moduponent®, CL-832-11 (2)
  • Coil , capacitor and thermistor set Moduponent®, CL-832-12 (2 coils, 2 capacitors, 1 thermistor)
  • Capacitor and thermal breaker Moduponent®, CL-832-13
  • Universal motor Moduponent®, CL-832-14
  • AC power supply, CL-832-15
  • Resistor, 10 Ω, 10 W
  • Student manual, 1 copy per cabinet
  • Teacher guide, 1 copy per order of 5 cabinets

 

 

You must be connected to access this section. Please register or, if you already have an account, login.

You must be logged in to write a review about our products.

 

Testimonials

I got the half car out of the crate and working yesterday and today I had my Level 3 Electronic Climate Control diagnostics lab using it. This teaching aid is great! The workmanship and design is excellent and it is just perfect for the Level 3 curriculum, including the upcoming changes. We were fortunate that the IPro scan tool we received from the Uniselect donation communicates quite well with the Audi CAN bus system. The Audi also has the electronically controlled, clutchless compressor which is covered in our theory classes so it's a good reinforcement to be able to see it in action, manipulate it and communicate with it. I am very pleased with the quality and applicability of our ConsuLab products (including the engine/AC bench we got recently). They allow me to teach up to 8 students in great detail, whereas only one or two at a time can be involved in a full car. I am looking forward to the imminent arrival of our AC board. Thanks for your excellent insight of design and quality of manufacturing.

Prof. Thomas Brown, Centennial College

Partners

   
 
All Partners

Consulab

Consulab manufactures educational training materials adapted to meet the needs of technical and vocational schools in the fields of transportation technology electrical engineering.

Learn More

Contact

+1 (800) 567-0791 . 8pm - 5pm EST

4210 Jean-Marchand Street
Quebec City, QC . Canada, G2C 1Y6

Email info@consulab.com

More Information