English (Canadian) .jpg)
|
|
CL-1450-50 Transmission Line - 50Hz50617The Transmission Lines traines clearly demonstrates the most important features and specifications of transmission lines used in electrical energy. Energy losses in the form of heat and vol... |
|
CL-318 Three Phase Transformer50120The CL-318 consists of a three phase transformer with three primary and six secondary windings. It can be used to teach principles of three phase transformers, for example determi... |
.jpg)
|
CL-318-50 Three Phase Transformer50440The CL-318-50 consists of a three phase transformer with three primary and six secondary windings. It can be used to teach principles of three phase transformers, for example dete... |
|
CL-320 THREE PHASE UNIT FOR CORRECTING VOLTAGE AND ANGLE - 60Hz50121The CL 320, Three Phase Unit for Correcting Voltage and Angle Phase, shows improvement of power factor by using a three-position switch providing with the connection of an internal bank of capac... |
.jpg)
|
CL-320-50 THREE PHASE UNIT FOR CORRECTING VOLTAGE AND ANGLE - 50Hz50441The CL 320-50, Three Phase Unit for Correcting Voltage and Angle Phase, shows power factor improvement by using a three-position switch that provides connection of the capacitors internal bank i... |
|
CL-325 THREE PHASE NETWORK UNIT - 60 Hz50122The CL-325 Three Phase Network Unit simulates a three-phase overhead transmission line at any different kV and/or distance. The unit also demonstrates:
|
.jpg)
|
CL-325-50 THREE PHASE NETWORK UNIT - 50 Hz50442The CL-325-50 Three Phase Network Unit simulates a three-phase overhead transmission line at any different kV and/or distance. The unit also demonstrates:
|
|
EM-122TE Simulator66642The ConsuLab EM-122TE is our newest encabulator training system. This product includes cutaways, demonstration models, and a special base plate. It also has an available programmable fault box t... |
.jpg)
|
EM-500-01 ALTERNATOR TRAINER w/EXTERNAL VOLTAGE REGULATION52778The ConsuLab EM-500-01 Alternator Trainer — Externally Regulated — is a trainer that allows instructors to demonstrate the operation of automotive charging systems with external volt... |
.jpg)
|
EM-500-02 ALTERNATOR TRAINER w/INTERNAL VOLTAGE REGULATION_52778-1The ConsuLab EM-500-02 Alternator Trainer — Internally Regulated — is a trainer that allows instructors to demonstrate the operation of automotive charging systems with internal volt... |
|
CL-1919-05 OHM'S LAW & DC CIRCUITS TRAINER53044The CL-1919-05 Ohm's Law & DC Circuits trainer is a self-contained educational learning system designed to assist instructors in teaching students basic electrical and electronic theory.... |
|
EM-140 G4FD Hyundai/Kia 1.6L Gasoline Direct Injection Engine Trainer35024-SThe EM-140 G4FD engine performance trainer is a fully operational engine mounted on a mobile stand. Trainer is based on a 2012-2016 Kia Rio / Hyundai Accent 1.6L GDI engine. Trainer is easy to w... |
|
EM-140 GM ECOTEC 2.2L ENGINE TRAINER52619-SThe ConsuLab EM-140 engine performance trainer is a fully operational engine mounted on a mobile stand. Trainer is based on 2007 and newer GM ECOTEC 2.2L global engine platform. The trainer is e... |
.jpg)
|
EM-140 GM ECOTEC 2.2L ENGINE TRAINER WITH HVAC52619-S-ACThe ConsuLab EM-140 engine performance trainer with HVAC is a fully operational engine mounted on a mobile stand. Trainer is based on 2007 and newer GM ECOTEC 2.2L global engine platform. The tr... |
|
EM-200-25 SPEED & POSITION SENSORS TRAINER52984The EM-200-25 Speed and Position Sensors trainer is used to demonstrate the operation, diagnosis and testing of common types of analog and digital speed and position sensors as they operate... |
.jpg)
|
EM-200-28 DRIVESHAFT ANGLE TRAINER53054The ConsuLab EM-200-28 is designed to help demonstrate and simplify the complex acceleration and deceleration phenomenon that occurs in revolving universal joints and drive shafts operating at v... |
.jpg)
|
EM-200-19 CUTAWAY STARTING SYSTEM TRAINER52932The EM-200-19 Starting System Trainer allows for the demonstration of a complete starting system using real-world components. Key areas of the starter have been cutaway to allow visual observati... |
|
EM-122-1 Four-wheel Honda ABS Trainer52621-1The EM-122-1 Four-wheel Honda ABS trainer is used to demonstrate the functionality of the ABS braking system as it operates on a real vehicle. The trainer is built with OEM components and i... |
.jpg)
|
EM-123-4 Four-wheel Hydraulic Brake Trainer - Honda52746-1The EM-123-4 four-wheel hydraulic brake system trainer is used to demonstrate the functionality of a typical non-ABS braking system as it operates on a real vehicle. The trainer is built with OE... |
|
EM-2000-OT A/C SYSTEM TRAINER W/ORIFICE TUBE52941The Consulab EM-2000-OT Air Conditioning trainer is a complete A/C system with unique features designed to enhance the instruction of air conditioning physics. The trainer uses the orifice tube ... |
|
EM-2000-TXV A/C SYSTEM TRAINER W/TXV52661The Consulab EM-2000-TXV Air Conditioning trainer is a complete A/C system with unique features designed to enhance the instruction of air conditioning physics. The trainer uses the TXV (Thermal... |
.jpg)
|
EM-2000-HB A/C SYSTEM TRAINER W/H-BLOCK (TXV)53094The ConsuLab EM-2000-HB Air Conditioning trainer is a complete A/C system with unique features designed to enhance the instruction of air conditioning physics. The trainer uses the H-Block TXV d... |
.jpg)
|
EM-2000-HB-R1234YF A/C SYSTEM TRAINER W/H-BLOCK (R1234YF)_53094-RThe ConsuLab EM-2000-HB-R1234yf Air Conditioning trainer is a complete A/C system with unique features designed to enhance the instruction of air conditioning physics. The trainer uses the H-Blo... |
.jpg)
|
EM-200-29 Hybrid Planetary Gearset Trainer53137The EM-200-29 Hybrid Planetary Gearset Trainer is designed to help instructors teach and students to understand the somewhat complex operation of a typical hybrid vehicle drivetrain. Based on a ... |
|
EM-1100 PLANETARY GEAR SET TRAINER52340The ConsuLab EM-1100 Planetary Gear Set Trainer is a simple planetary gear assembly that consists of 3 primary components: The ring gear (the outer most gear in red), 3 planet gears (green ... |
|
EM-130 Suspension and Steering Trainer52793The ConsuLab EM-130 Suspension and Steering trainer is designed to assist instructors in teaching basic alignment geometry and the function of a MacPherson strut suspension system with rack &... |
|
CL-1918-3S Single sided automotive lighting system trainer53170The ConsuLab CL-1918-3S trainer has been developed to teach modern automotive lighting systems through student led learning exercises where students develop their understanding of the syste... |
.jpg)
|
HV-1918-1S HEAVY VEHICLE LIGHTING SYSTEM TRAINER - SINGLE52929The ConsuLab HV-1918-1S Single-sided Heavy Vehicle Lighting System Trainer utilizes the “Moduponent®” design feature which allows unlimited expansion capabilities. A Moduponent&r... |
.jpg)
|
HV-1918-1D HEAVY VEHICLE LIGHTING SYSTEM TRAINER - DOUBLE52930The ConsuLab HV-1918-1D Double-sided Heavy Vehicle Lighting System Trainer utilizes the “Moduponent™” design feature which allows unlimited expansion capabilities. A Modup... |
|
HV-1918-1U HEAVY VEHICLE LIGHTING SYSTEM TRAINER - SINGLE_52929-1The he ConsuLab HV-1918-1U Heavy Vehicle Lighting System Trainer Upgrade Kit allows to convert the single-sided HV-1918-1S to a double-sided HV-1918-1D using the same stand. |
.jpg)
|
MP-1918-1S CAN BUS Multiplex Trainer - Single53037The ConsuLab MP-1918-1S is a single-sided CAN Bus Multiplex trainer that communicates in J-1939 protocol. Digital and analog inputs and outputs can be activated. Analog signals can be displ... |
.jpg)
|
MP-1918-1U CAN Bus Multiplex Trainer Upgrade Kit w/Power Supply & 3rd Panel53039_1TThe ConsuLab MP-1918-1U CAN Bus Multiplex Trainer Upgrade Kit allows to convert the single-sided MP-1918-1S to a double-sided MP-1918-1D, or the single-sided HV-1918-1S to a single-sided HV-191... |
.jpg)
|
MP-1918-1D CAN BUS Multiplex Trainer - Double53038The ConsuLab MP-1918-1D is a double-sided CAN Bus Multiplex trainer that communicates in J-1939 protocol. Digital and analog inputs and outputs can be activated. Analog signals can be displ... |
|
HV-MP-1918 Combination Heavy Truck & Multiplexed Lighting System Trainer53129The ConsuLab HV-MP-1918 trainer combines an HV-1918-1S Heavy Vehicle Lighting Systems Trainer on one side, with an MP-1918-1S Heavy Vehicle Multiplex Trainer on the opposite side. The trai... |
|
EM-140B HYUNDAI ACCENT 1.6L ENGINE TRAINER35030SThe engine performance trainer is a fully operational engine mounted on a mobile stand. Trainer is based on 2008-2010 Hyundai Accent 1.6L global engine platform. The trainer is easy to work on a... |
.jpg)
|
CL-1918-3D Double sided automotive lighting system trainer53171The ConsuLab CL-1918-3D trainer has been developed to teach modern automotive lighting systems through student led learning exercises where students develop their understanding of the syste... |
|
EM-141S-TY01 ENGINE MECHANICAL DIAGNOSIS TRAINER53234Have you ever wanted a running engine with repeatable mechanical faults that all of your students could diagnose? Would you like a system that has internal mechanical faults not requiring you to... |
|
EM-145S-3 ENGINE STAND w/Starting Station - Toyota 1.8L53106The Toyota engine on a swivel stand is designed for student instruction and practice covering engine mechanical inspection, disassembly, measurement and reassembly. The engine is securely mounte... |
.jpg)
|
EM-145S-5 ENGINE STAND w/Starting Station - GM 2.2L ECOTEC53108The GM Ecotec 2.2L engine on a swivel stand is designed for student instruction and practice covering engine mechanical inspection, disassembly, measurement and reassembly. The engine is securel... |
.jpg)
|
EM-145S-2 ENGINE STAND w/Starting Station - Hyundai/Kia 1.6L53105The Hyundai/Kia 1.6L DOHC engine on a swivel stand is designed for student instruction and practice covering engine mechanical inspection, disassembly, measurement and reassembly. The engine is ... |
|
EC-140 Cutaway Engine and Transmission - Honda 1.8L52686The EC-140 Cutaway Engine and Transmission Trainer has been specifically designed for demonstrating the operation of a Honda R18Z1 1.8L engine with transmission, shift lever and the iVTEC system... |
.jpg)
|
EC-480GV Cutaway Variable Geometry Turbocharger53101More info coming soon |
.jpg)
|
EC-480WG Cutaway Turbocharger with Wastegate52947More info coming soon |
.jpg)
|
EC-470 Cutaway Supercharger52809A ConsuLab supercharger cutaway will allow your students to rotate the supercharger by hand to visualize the operating principals that make them function. |
.jpg)
|
EM-145C-1 Engine stand w/starting station - Custom53104Does your program have multiple donated engines that you wish could be live tested? ConsuLab has the solution. We can custom build sturdy engine stands and starting test stat... |
|
USCOPE DIGITAL STORAGE OSCILLOSCOPE - BASIC KITuScope_B-KitThe uScope is a single channel, pocket-sized, digital storage oscilloscope (DSO) that is small, quick, and powerful enough to capture the fastest signals when connected to ConsuLab trainers or o... |
|
EM-145N, Swivel engine stand - no engine35000-2Sturdy swivel stand used for mounting engine to meet your specific needs in engine repair. Custom machined mounting plate. |
|
USCOPE DIGITAL STORAGE OSCILLOSCOPE - MASTER KITuScope_M-KitThe uScope Master Kit is a single channel, pocket-sized, digital storage oscilloscope (DSO) that is small, quick, and powerful enough to capture the fastest signals when connected to ConsuLab tr... |
.jpg)
|
CUTAWAY CUSTOM AUTOMATIC TRANSMISSION/TRANSAXLEEC-1103ACThe Cutaway Custom Automatic Transmission/Transaxle can be equipped with OEM components from any vehicle of your choice. This custom trainer can be designed to incorporate any application that m... |
.jpg)
|
EC-1102 CUTAWAY CONTINUOUSLY VARIABLE TRANSMISSION (CVT)52807The EC-1102 Cutaway CVT has been specifically designed for teaching the continuously variable transmission. This type of transmission can provide a seamless transition through an infinite n... |
|
EC-1103A CUTAWAY 4X4 DRIVE TRAIN W/AUTOMATIC TRANSMISSION52685The ConsuLab EC-1103A cutaway trainer demonstrates the internal operation of a 4X4 drivetrain with automatic transmission and permits the student to visualize and safely operate the system. For ... |
|
EC-1104 CUTAWAY AUTOMATIC TRANSAXLE - CHRYSLER 41TE52635The ConsuLab EC-1104 cutaway trainer demonstrates the internal operation of a Chrysler 41TE automatic transaxle and permits the student to visualize and safely operate the system. For training p... |
.jpg)
|
EC-1105-1 CUTAWAY AUTOMATIC TRANSAXLE - GM 4T60E52668The ConsuLab EC-1105-1 cutaway trainer demonstrates the internal operation of a GM 4T60E automatic transaxle and permits the student to visualize and safely operate the system. For training purp... |
.jpg)
|
EC-1106-1 CUTAWAY ALLISON TRANSMISSION - 1000 SERIES52742_The ConsuLab EC-1106-1 cutaway Allison transmission has been specifically designed for teaching heavy duty automatic transmission theory and operation. It has been strategically sectioned and c ... |
.jpg)
|
EC-1107-2 AUTOMATIC TRANSMISSION CUTAWAY - GM 4L60E52993The ConsuLab EC-1107-2 cutaway trainer demonstrates the internal operation of a GM 4L60E automatic transaxle and permits the student to visualize and safely operate the system. For training purp... |
.jpg)
|
EC-1101 CUTAWAY MANUAL TRANSAXLE52634The ConsuLab EC-1101 cutaway trainer demonstrates the internal operation of a Getrag F23 5-speed fully synchronized manual transaxle and permits the student to visualize and safely operate ... |
.jpg)
|
EC-1101-1 CUTAWAY MANUAL TRANSAXLE - Ford 5 speed_52634-1The ConsuLab EC-1101-1 cutaway trainer demonstrates the internal operation of a Ford 5-speed manual transmission and permits the student to visualize and safely operate the system. For training ... |
.jpg)
|
EC-1103M CUTAWAY 4X4 DRIVE TRAIN W/MANUAL TRANSMISSION52908The ConsuLab EC-1103M cutaway trainer demonstrates the internal operation of a 4X4 drive train with manual transmission and allows visualization of gear changes, clutch function, transfer case p... |
|
EC-410 CUTAWAY VISCOUS COUPLER52681The ConsuLab EC-410 cutaway trainer is an application that can be chosen to demonstrate the operation of a viscous coupler. |
|
EC-420 CUTAWAY TORSEN DIFFERENTIAL52682The ConsuLab EC-420 cutaway trainer is an application that can be chosen to demonstrate the operation of a Torsen differential. |
|
EC-425 CUTAWAY CLUTCH TYPE DIFFERENTIAL52990The ConsuLab EC-425 cutaway trainer is an application that can be chosen to demonstrate the operation of a clutch type differential. |
|
EC-430 CUTAWAY OPEN DIFFERENTIAL52684The ConsuLab EC-430 cutaway trainer is an application that can be chosen to demonstrate the operation of an open differential. |
|
EC-431 CUTAWAY DIFFERENTIAL WITH ADJUSTMENT CAPABILITIES53112The ConsuLab EC-431 cutaway trainer is an application that can be chosen to demonstrate the operation of a differential equipped with adjustment screws. |
|
Cutaway Hydraulic Clutch System Trainer53185As an instructor, have you struggled to demonstrate how a clutch system works to your students? The new EC-1120 is a working system of actual, all new components so that students can visualize t... |
.jpg)
|
EM-200-18 ELECTRIC POWER STEERING TRAINER52339The EM-200-18 is a fully functional electric power steering system trainer. The trainer provides a safe and effective method of demonstrating the principles of electric power steering systems us... |
.jpg)
|
EC-140-15 CUTAWAY ELECTRIC ASSIST POWER STEERING52933The ConsuLab EC-140-15 Cutaway Electric Assist Power Steering, allows the student to understand the basics of an electric assist power steering as used in today's vehicles. It has two handle... |
|
EM-300-07 SRS AIR BAG TRAINER52591The ConsuLab EM-300-07 SRS Air Bag Trainer allows students to understand the fundamentals of air bag systems as used in today’s vehicles. Built with OEM components, the trainer functions i... |
|
EM-122 Four-wheel GM ABS Trainer_52621The EM-122 Four-wheel GM ABS trainer is used to demonstrate the functionality of the ABS braking system as it operates on a real vehicle. The trainer is built with OEM components and is bas... |
|
EM-123-2D Double-sided Brake Trainer52995The EM-123 2D double-sided two-wheel hydraulic brake system trainer is used to demonstrate the functionality of a typical hydraulic braking system as it operates on a real vehicle. The tra... |
|
EC-122 Cutaway active brake booster and master cylinder52992The ConsuLab EC-122 cutaway allows to visually demonstrate the operation and internal parts of a vacuum brake booster and master cylinder. The trainer is equipped with a braking handle tha... |
|
EM-123-2 Two-wheel Hydraulic Brake Trainer52746The EM-123-2 two-wheel hydraulic brake system trainer is used to demonstrate the functionality of a typical non-ABS braking system as it operates on a real vehicle. The trainer is built with OEM... |
.jpg)
|
EM-123-4 Four-wheel Hydraulic Brake Trainer – GM52746-1GMThe EM-123-4 four-wheel hydraulic brake system trainer is used to demonstrate the functionality of a typical non-ABS braking system as it operates on a real vehicle. The trainer is built with OE... |
|
MP-750 MULTIPLEX NETWORK DIAGNOSTIC TRAINERMP-750_052808
Introduction: |
|
MP-1918-2U CAN Bus Multiplex Trainer Upgrade Kit53039_2The ConsuLab MP-1918-2U CAN Bus Multiplex Trainer Upgrade Kit allows to convert one side of a double-sided HV-1918-1D to a single-sided HV-1918-1S and a single-sided MP-1918-1S using the sa... |
|
CL-1919-05-12 Storage Case53154The CL-1919-05-12 accessory is used for the storage of CL-1919-05 Ohm's Law and DC Circuits trainer cabinets, jumper test leads and manuals. |
.jpg)
|
EM-200-22 EVAP (EVAPORATIVE EMISSIONS) TRAINER52166The EM-200-22 EVAP trainer is designed as a functional evaporative emissions system based on a Chevrolet Cobalt platform. It can be used to teach the operational functions of a typical evap... |
|
EM-200-12 DISTRIBUTOR IGNITION SYSTEM TRAINER52612The ConsuLab EM-200-12 Distributor Ignition System Trainer, is a training board used to teach the ignition system with distributor. The trainer is manufactured using brand new OEM components.&nb... |
|
EM-750P CAN Bus Lighting & Accessory System W/DOORS52808The ConsuLab EM-750P CAN Bus Lighting and Accessory System Trainer with Doors is built using OEM automotive lighting, door and accessory components. |
.jpg)
|
EM-750 CAN Bus Lighting & Accessory System Trainer52745The ConsuLab EM-750 CAN Bus Lighting and Accessory System Trainer is built using OEM automotive lighting, door and accessory components. |
|
MD-4000 SERIES Modular Electrical System Trainer53102The ConsuLab MD-4000 is a versatile and adaptable electrical/electronic training board that allows students to build electronic circuits. |
|
EM-200-24 WASTE-SPARK IGNITION SYSTEM TRAINER52791The ConsuLab EM-200-24 Waste-spark Ignition System Trainer is a training board used to teach the waste-spark electronic ignition system that is usually installed on some four-stroke cycle intern... |
.jpg)
|
EM-200-14 COIL-ON-PLUG IGNITION SYSTEM TRAINER52789The ConsuLab EM-200-14 trainer allows for the demonstration of a complete ignition system using COP technology. Terminal block receptacles are provided for diagnostic test points. A 12V source i... |
.jpg)
|
EM-200-01 INSTRUMENT CLUSTER TRAINER52602The EM-200-01 trainer allows for the demonstration of a complete instrument cluster using real-world components. Terminal block receptacles are provided for diagnostic test points. Trainer requi... |
.jpg)
|
EM-200-02D2 POWER WINDOW SYSTEM TRAINER - GM 2 door52603-2The EM-200-02D2 Two-door Power Window System Trainer allows for the demonstration of a complete power window system using real-world components. Terminal block receptacles are provided for diagn... |
|
EM-200-02D4H POWER WINDOW SYSTEM TRAINER - 4-door Hyundai52603-4The ConsuLab EM-200-02D4H is a functional Power Window System Trainer mounted on a plastic training board with the following features:
|
.jpg)
|
EM-200-02D4C POWER WINDOW SYSTEM TRAINER - GM 4 door52603-4CThe EM-200-02D4 Four-door Power Window System Trainer allows for the demonstration of a complete power window system using realworld components. Terminal block receptacles are provided for diagn... |
|
EM-200-03D2H POWER DOOR LOCK SYSTEM TRAINER - 2-door Hyundai52604_2The ConsuLab EM-200-03D2H is a functional Power Door Lock System Trainer mounted on a plastic training board with the following features:
|
.jpg)
|
EM-200-03D4C POWER DOOR LOCK SYSTEM TRAINER - 4-door GM52604-4CThe EM-200-03D4C Four-door Power Door Lock System Trainer allows for the demonstration of a complete power window system using realworld components. Terminal block receptacles are provided for d... |
|
EM-200-03D4H POWER DOOR LOCK SYSTEM TRAINER - 4-door Hyundai52604-4HThe ConsuLab EM-200-03D4H is a functional Power Door Lock System Trainer mounted on a plastic training board with the following features:
|
.jpg)
|
EM-200-04 HORN SYSTEM TRAINER52605The ConsuLab EM-200-04 trainer allows for the demonstration of a complete horn system using real-world components. Terminal block receptacles are provided for diagnostic test points. The trainer... |
.jpg)
|
EM-200-05 POWER SEAT SYSTEM TRAINER52606The EM-200-05 trainer allows for the demonstration of a complete power seat system using real-world components. Terminal block receptacles are provided for diagnostic test points. Fault insertio... |
.jpg)
|
EM-200-06 WIPER & WASHER SYSTEM TRAINER52592The EM-200-06 trainer allows for the demonstration of a complete wiper and washer system using real-world components. Terminal block receptacles are provided for diagnostic test points. It inclu... |
.jpg)
|
EM-200-11 BLOWER MOTOR SYSTEM TRAINER52611The ConsuLab EM-200-11 trainer allows for the demonstration of a complete blower motor system using real-world components. Terminal block receptacles are provided for diagnostic test points. The... |
|
EM-200-17 AUDIO SYSTEM TRAINER52855The ConsuLab EM-200-17 Audio System Trainer is mounted on a plastic training board with OEM components. It contains the following features:
|
|
EM-200-09 TRAINING BOARD TABLETOP STAND52609The ConsuLab EM-200-09 Training Board Tabletop Stand is designed to safely support any EM-200 Series Training Board on table or working surface. |
.jpg)
|
EM-200-10 TRAINING BOARDS STORAGE CABINET52610The ConsuLab EM-200-10 Training Boards Storage Cabinet is designed to store EM-200 Series Training Boards. This mobile unit is divided into two (2) compartments. It can store six (6) to eig... |
.jpg)
|
EM-500-03 ALTERNATOR TRAINER w/PCM-CONTROLLED REGULATION_52778-2The EM-500-03 trainer allows instructors to demonstrate the operation of automotive charging systems controlled by a PCM. The synoptic diagram and the layout of all the control and instrumentati... |
.jpg)
|
EC-520 CUTAWAY BATTERY52945The ConsuLab EC-520 Cutaway Battery is the ideal aid for teaching battery principles and allows visualization of the inner parts. Designed to work in lawn mowers, lawn and garden tractors, small... |
|
MD-4000-12 Storage Case53213Custom built, mobile and lockable storage case which can accommodate up to twelve (12) MD-4000 Series Modular Electrical System trainers. |
|
SIGNAL DISTRIBUTION HARNESSSIGNAL_HARNESSThe Signal Distribution Harness is used to distribute one automotive level signal to test equipment such as multimeters and lab scopes. Modular design allows for various classroom configurations... |
|
Storage Case for EM-2000 Series53168Mobile and rugged case to store any of the EM-2000 Series Trainers. It is equipped with a tilting ramp for rolling the trainer in and out. |
|
EM-101 HVAC TRAINING BENCH W/DOUBLE ZONE AUTOMATIC CONTROL - BUICK LUCERNE52618The EM-101 HVAC Training Bench with Double Zone Automatic Control is based on a GM Buick Lucerne and has been specifically designed for the instruction of air conditioning systems used in today ... |
|
EC-2001-01 CUTAWAY VAR. DISPLACEMENT A/C COMPRESSOR w/SLIPPING CLUTCH52942The EC-2001-01 cutaway variable displacement swash plate type design is equipped with an operational OEM 12VDC electromagnetic clutch that can be applied or disengaged with a swit... |
|
EC-2001-02 CUTAWAY SCROLL TYPE A/C COMPRESSOR w/SLIPPING CLUTCH - HONDA53016The EC-2001-02 cutaway scroll type design is equipped with an operational OEM 12VDC electromagnetic clutch that can be applied or disengaged with a switch. Also includes a feature that... |
.jpg)
|
EC-2001-07 Cutaway Hybrid Scroll Type A/C Compressor53156The EC-2001-07 allows students to see the internal operation of the electrically driven hybrid scroll type A/C compressor. The 3-phase electric motor that drives the compressor can be rotated us... |
|
EC-2100 CUTAWAY TXV H-BLOCK53053The ConsuLab EC-2100 cutaway trainer is designed to demonstrate the internal operation of a typical TXV H-block used to control refrigerant flow in today’s HVAC systems. |
|
EM-140C-HN01 Honda Civic 1.8L Engine Trainer35032The ConsuLab EM-140C-HN01 engine trainer is a fully functional recycled engine mounted on a mobile stand. The trainer is based on a 2012-2015 Honda Civic 1.8L global vehicle platform. The traine... |
|
EM-140C-TY01 Toyota Yaris 1.5L Engine TrainerTY01_35002The ConsuLab EM-140C-TY01 engine trainer is a fully functional recycled engine mounted on a mobile stand. The trainer is based on a 2012-2018 Toyota Yaris 1.5L global vehicle platform. The train... |
|
EM-140C-TY02 Toyota Corolla 1.8L Engine TrainerTY02_035002The ConsuLab EM-140C-TYO2 engine trainer is a fully functional recycled engine mounted on a mobile stand. The trainer is based on a 2014-2018 Toyota Corolla 1.8L global vehicle platform. The tra... |
|
EM-140C-FD02 Ford Escape 1.6L Turbo Engine Trainer35003The ConsuLab EM-140C-FDO2 engine trainer is a fully functional recycled engine mounted on a mobile stand. The trainer is based on a 2013-2014 Ford Escape SE 1.6L global vehicle platform. The tra... |
|
EM-140C-FC01 Dodge Caravan 3.6L Engine Trainer35037The ConsuLab EM-140C-FC01 engine trainer is a fully functional recycled engine mounted on a mobile stand. The trainer is based on a 2012-2016 Dodge Caravan 3.6L global vehicle platform. The trai... |
|
EM-330-1 FUEL INJECTION AND GM ENGINE MANAGEMENT TRAINER52616-1The ConsuLab EM-330-1 Fuel Injection and Engine Management Trainer functions as in a real automobile, but uses non-flammable fluid instead of gasoline for safety and educational purposes. T... |
|
EC-200-30 GASOLINE DIRECT INJECTION SYSTEM CUTAWAY TRAINER53179The ConsuLab EC-200-30 Gasoline Direct Injection System cutaway trainer is designed from the ground up to provide instructors with a great visual learning tool to assist in teaching students the... |
|
EM-140C CUSTOM GASOLINE DIRECT INJECTION ENGINE BENCHEM-140C_GDIThe EM-140C engine performance trainer is a fully operational engine mounted on a mobile stand. Trainer is based on 2012 and newer global engine platforms and can be made from any OEM vehic... |
|
CUSTOM GASOLINE ENGINE BENCH TRAINEREM-140CA ConsuLab custom gasoline engine bench equipped with an engine from any vehicle of your choice. This custom trainer can be designed to incorporate any vehicle system you require. |
|
CUSTOM HALF VEHICLE TRAINEREM-610A ConsuLab half vehicle can be based on any vehicle of your choice. This custom trainer can be designed to incorporate any vehicle system you require. |
.jpg)
|
EM-140D 2011 & NEWER GM DURAMAX 6.6L DIESEL ENGINE BENCH35026The diesel engine trainer is a fully operational engine mounted on a mobile stand. Trainer is based on 2011 & newer Chevrolet Silverado or GMC Sierra Duramax 6.6L global engine platform... |
.jpg)
|
EM-140D 2011 & Newer Ford Powerstroke DIESEL ENGINE BENCH35017The diesel engine trainer is a fully operational engine mounted on a mobile stand. Trainer is based on 2011 and newer Ford truck with Powerstroke 6.7L 8-cylinder diesel engine platform. Tra... |
.jpg)
|
EM-140D 2013 & Newer Ram Cummins DIESEL ENGINE BENCH w/SCR35031The diesel engine trainer is a fully operational engine mounted on a mobile stand. The trainer is based on 2013 & newer Ram Truck w/Cummins 6.7L global engine platform. The trainer is e... |
|
CUSTOM LIGHT DIESEL ENGINE BENCHEM-140DA ConsuLab custom light diesel engine bench equipped with an engine from any vehicle of your choice. This custom trainer can be designed to incorporate any vehicle system you require. |
|
2014-2010 Jetta or Golf 2.0L Diesel Engine Trainer35014The diesel engine trainer is a fully operational engine mounted on a mobile stand. The trainer is based on 2010-2014 VW Jetta or Golf/Passat TDI 2.0L global engine platform. The trainer is ... |
.jpg)
|
EC-490 - CUTAWAY DIESEL EXHAUST AFTERTREATMENT SYSTEM53131The ConsuLab EC-490 is a cutaway diesel exhaust system trainer that allows students to view the components of a diesel exhaust aftertreatment system using LED’s and electronic controls to ... |
|
EC-140H, CUTAWAY TOYOTA PRIUS HYBRID DRIVE TRAIN52944The EC-140H Cutaway Toyota Prius Hybrid Drive Train is a training system designed specifically for teaching how a typical hybrid drive train operates. The trainer consists of all cutaway drive t... |
.jpg)
|
EM-140-09 Coolant Flow Sight Glass52910The ConsuLab EM-140-09 accessory is available as optional equipment for any engine trainer and can be can be placed anywhere within the liquid cycle to indicate the movement of the coolant. &nbs... |
|
EM-140-16 Transport Handle53092The ConsuLab EM-140-16 accessory is available as optional equipment for any engine trainer and can be installed on dash panel. The handle is made of aluminum and permits to easily move the ... |
.jpg)
|
EM-1240 Fork Lift Bars52827-2The ConsuLab EM-1240 accessory is available as optional equipment for any engine trainer or starting station. The heavy duty steel bars permit to handle the trainer using a lift without any damm... |
.jpg)
|
EM-1200 Vinyl Dust Cover for G4FD24498-1The ConsuLab EM-1200 accessory is available as optional equipment for EM-140 G4FD engine trainers. The vinyl cover is equipped with zippers and permits to protect the equipment from dust and dam... |
|
EM-1200 Vinyl Dust Cover for GM Ecotec24499The ConsuLab EM-1200 accessory is available as optional equipment for EM-140 GM Ecotec engine trainers. The vinyl cover is equipped with zippers and permits to protect the equipment from dust an... |
|
EM-1200 Vinyl Dust Cover for swivel engine stand and starting station24357The ConsuLab EM-1200 accessory is available as optional equipment for EM-145 swivel engine stands and starting stations. The vinyl cover is equipped with zippers and permits to protect the equip... |
|
EM-1200 Vinyl Dust Cover for EM-200024586The ConsuLab EM-1200 accessory is available as optional equipment for EM-2000 trainers. The vinyl cover permits to protect the equipment from dust and damp when not in use. |
.jpg)
|
EM-1200 Vinyl Dust Cover for EM-140B24498_The ConsuLab EM-1200 accessory is available as optional equipment for EM-140B Hyundai Accent engine trainers. The vinyl cover is equipped with zippers and permits to protect the equipment from d... |
|
EM-140-20 Optional Diagnostic Equipment Shelf53147The optional ConsuLab EM-140-20 shelf can be installed on all engine trainers. It provides a convenient location for scan tools, digital multimeters and other diagnostic equipment. |
.jpg)
|
EM-250-2A ELECTRONIC FAULT BOX FOR ECM AND HVAC (GM)52931The EM-250-2A Electronic Programmable Fault Box for ECM and HVAC is designed to allow remote system fault insertion into the GM ECOTEC 2.2L engine bench. This product comes standard with compute... |
|
EM-250-2B ELECTRONIC FAULT BOX FOR PCM (HYUNDAI)52891The EM-250-2B Electronic Programmable Fault Box for PCM is designed to allow remote system fault insertion into the Hyundai 1.6L DOHC engine bench. This product comes standard with computer soft... |
.jpg)
|
EM-250 MANUAL FAULT BOX FOR ENGINE PERFORMANCE52575The ConsuLab EM-250 Manual Fault Box for Engine Performance is a device that enables failure or malfunction of engine sensors and actuators without having to remove or replace the affected part.... |
|
EM-254 MANUAL FAULT BOX FOR A/C52672The ConsuLab EM-254 Fault Box for A/C generates fault or malfunction simulation of the sensors and actuators used in a mobile engine training bench equipped with an air conditioning system so as... |
|
ELECTRONIC FAULT BOX SOFTWARE APPLICATIONFBSHere you can download the computer software that allows remote control of the fault box from a laptop or desktop computer. |
|
EM-1200 Vinyl Dust Cover for HV-95024358The ConsuLab EM-1200 accessory is available as optional equipment for HV-950 diesel engine trainers. The vinyl cover is equipped with zippers and permits to protect the equipment from dust and d... |
|
HV-950-B6.7 DIESEL ENGINE BENCH - CUMMINS EPA 2017 B6.7_35100-1Especially built to meet all diesel engine performance and repair tasks. The EPA 2017 B6.7 Cummins diesel engine bench w/EGR, DPF, SCR, is mounted on a tubing steel stand. Completely operational... |
|
HV-950-C4.4 DIESEL ENGINE BENCH - CATERPILLAR C4.4 TIER 4F_35153-TIER4Especially built to meet all diesel engine performance and repair tasks. The Caterpillar C4.4 diesel engine bench is mounted on a tubing steel stand. Completely operational and safe, this standa... |
|
HV-950-QSB DIESEL ENGINE BENCH - CUMMINS QSB6.7 TIER 4F35106Especially built to meet all diesel engine performance and repair tasks. The Cummins QSB6.7 Diesel Engine Bench is mounted on a tubing steel stand. Completely operational and safe, this standard... |
|
HV-950-C7 DIESEL ENGINE Bench, CAT C7.1 TIER 4F35154-TIER4Especially built to meet all diesel engine performance and repair tasks. The new Caterpillar C7.1 diesel engine bench is mounted on a tubing steel stand. Completely operational and safe, this st... |
|
HV-950-JD6.8 DIESEL ENGINE BENCH - JOHN DEERE 6.8L TIER 4F35190Especially built to meet all diesel engine performance and repair tasks. The John Deere 6068HFC 6.8L diesel engine bench is mounted on a tubing steel stand. Completely operational and safe, this... |
.jpg)
|
HV-950-ISB DIESEL ENGINE BENCH - CUMMINS ISB6.7 EPA 2013 RECYCLED_35100UEspecially built to meet all diesel engine performance and repair tasks. The recycled Cummins ISB6.7 EPA 2013 diesel engine bench w/EGR, DPF, SCR, is mounted on a tubing steel stand. Completely ... |
|
HV-950-ISX DIESEL ENGINE BENCH - CUMMINS ISX15 EPA 201335102Especially built to meet all diesel engine performance and repair tasks. The Cummins ISX15 EPA 2013 diesel engine bench w/EGR, DPF, SCR, is mounted on a tubing steel stand. Completely operationa... |
.jpg)
|
HV-950-DD15 Diesel Engine Bench - Detroit Diesel DD15 EPA 2013_35160-1Specially built to meet all diesel engine performance and repair tasks. The recycled EPA 2013 Detroit Diesel DD15 diesel engine bench w/EGR, DPF, SCR, is mounted on a tubing steel stand. Complet... |
|
Custom Heavy Diesel Engine TrainerHV-950A Consulab custom heavy diesel engine bench equipped with an engine from any application of your choice |
|
CUTAWAY DIESEL ENGINEEC-950A ConsuLab cutaway diesel engine can be developed from any application or component of your choice. The components or component can be provided by ConsuLab or the customer. Example component cut... |
|
EC-1108 CUTAWAY EATON TRANSMISSION TRAINER53155The EC-1108 cutaway Eaton transmission has been designed for teaching Eaton heavy-duty transmission theory and operation. This model provides several forward speeds and reverses, consisting of a... |
.jpg)
|
EC-1106-3 CUTAWAY ALLISON TRANSMISSION - 3000 SERIES52742-3The ConsuLab EC-1106-3 cutaway Allison transmission has been specifically designed for teaching heavy duty automatic transmission theory and operation. It has been strategically sectioned and c ... |
.jpg)
|
HV-125-BWP AIR BRAKE DRIVING SIMULATOR52877-BWPThe ConsuLab HV-125-BWP is everything you’ve always dreamed about when teaching air brakes systems. Imagine being able to take the entire class out for a road test and watch live data on a... |
.jpg)
|
EC-127 CUTAWAY 30/30 AIR BRAKE CHAMBER53145The EC-127 Cutaway 30/30 Air Brake Chamber is partly cut away so that a trainee can observe the internal elements housed within the chamber. |
|
HV-126-DM Air Drum Wheel End Training System w/CutawaysDM_52960The ConsuLab HV-126-DM_052960 trainer includes a heavy-duty trailer drum assembly with air chamber and wheel end. Using shop air the service and parking brakes can be applied, the brake system c... |
|
HV-126-DS Air Disc Wheel End Training System w/CutawaysDS_52960The ConsuLab HV-126-DS_052960 trainer includes a heavy duty truck disc assembly with air chamber. Using shop air; the service and parking brakes can be applied, the brake system can be dismantle... |
.jpg)
|
EC-500HV CUTAWAY HEAVY VEHICLE ALTERNATOR52963The ConsuLab EC-500HV Cutaway Diesel Alternator demonstrates the internal operation of a heavy duty diesel alternator and permits the student to visualize and safely rotate the system. |
|
Manuals ArchiveARCHIVEHere you can find an archive of manuals and curriculum for custom and discontinued products. |
.jpg)
|
EC-510HV FUNCTIONAL CUTAWAY DIESEL STARTER52964The ConsuLab EC-510HV Functional Cutaway Diesel Starter demonstrates the internal operation of a heavy duty diesel starter and permits the student to visualize and safely operate the system. |
.jpg)
|
HV-101 STAND-ALONE HEAVY VEHICLE HVAC TRAINER - M252948The HV-101 Heavy Vehicle HVAC System is based on a Freightliner Business Class M2 commercial truck and has been specifically designed for the instruction of air conditioning systems used in heav... |
|
Hydrostatic Transmission Trainer - Implement and SteeringFP-MF500-IS-TSEThe FP-MF500-IS-TSE Hydrostatic Transmission Trainer features the exact transmission found in the vast majority of skid-steer loaders, mini-backhoes, and numerous other mobile and industrial mac... |
|
Hydrostatic Transmission Trainer - Diesel Engine-drivenFP-500D-HT-TSEThe FP-500D-HT-TSE Hydrostatic Transmission Trainer features the exact transmission found in the vast majority of skid-steer loaders, mini-backhoes, and numerous other mobile and industrial mach... |
.jpg)
|
Hydrostatic Transmission Trainer - Electric Motor DrivenFP-500E-HT-TSEThe FP-500E-HT-TSE Hydrostatic Transmission Trainer features the exact transmission found in the vast majority of skid-steer loaders, mini-backhoes, and numerous other mobile and industrial mach... |
.jpg)
|
Steering System & Hydrostatic Transmission System TrainerFP-MF300-VCLSThe FP-MF300-VCLS 2-in-1 training simulator features a fully functional, “build-and-drive” hydraulic steering system on the front-end, and a fully functional “build-a... |
|
CL-1744 18-hole Group Lockout Box - 10" (25 cm)52135The CL-1744 18-hole group lockout box is used in a safety lockout procedure to ensure that a piece of equipment cannot be turned on, ressurized, or switched on accidentally while an employee is ... |
|
CL-1746 10-hole Group Lockout Box - 14" (36 cm)52144The CL-1746 10-hole group lockout box is used in a safety lockout procedure to ensure that a piece of equipment cannot be turned on, ressurized, or switched on accidentally while an employee is ... |
.jpg)
|
CUSTOM GROUP LOCKOUT BOXCL-1747ConsuLab can design a group lockout box to meet your needs. |
|
CL-1753 3-hole Padlock Holder52664The CL-1753 3-hole padlock holder can contain three padlocks. A chain with rings allows the hook to a belt. It is used in a safety lockout procedure to ensure that the equipment is not turned on... |
|
CL-1756 6-hole Padlock Holder52665The CL-1756 6-hole padlock holder can contain three padlocks. A chain with rings allows the hook to a belt. It is used in a safety lockout procedure to ensure that the equipment is not turned on... |
|
CL-1758 Lockout Hasp52741The CL-1758 lockout hasp allows multiple padlocks to be used when isolating one energy source and more padlocks are required. The lockout hasp can hold up to six (6) padlocks when jaws are close... |
|
AK-1106 Keyed Alike Safety Lock30063Keyed alike safety locks are used in group lockout procedures when many sources of energy are present on the same equipment that must be controlled. This type of safety lock can be part of ... |
|
ABUS-65/40 Keyed Different Safety Lock30062-3Keyed different safety locks are used in group lockout procedures when many sources of energy are present on the same equipment that must be controlled. This type of safety lock has its own... |
|
W-h Meter Testing Bench - Wye ConfigurationCPN-52236The wye-configured electric meter testing bench can be used as both a power supply and a load bench. The bench allows for simulated installation and use of measurement tools such as electric cou... |
.jpg)
|
CL-2460B DC Electronic Load Unit52787The DC electronic load unit is specially designed for testing and measuring a power available on the various points of the A.D.S.L. network DC power sources. The load mo... |
|
CL-2460F Testing Cables for DC Electronic Load Unit52806The cables are specially designed for connecting the DC electronic load unit (52787) to network testing equipment.
|
|
CL-2460C BIX Cables Adapter for DC Electronic Load Unit52813The adater is specially designed for connecting the DC electronic load unit (52787) to network BIX cables.
|
|
Transport Case for DC Electronic Load Unit92836The transport case is specially designed for the DC electronic load unit (52787). Equipped with casters and retractable extension handle.
|
.jpg)
|
CL-169 Custom Power Supply SeriesCL-169We can customize your CL-169 power supply with required voltages and currents, measuring instruments and other components to meet your needs. |
.jpg)
|
CL-5100 Heating System Control52797The CL-5100, Heating System Control, has been designed as a training aid to teach heating system controllers. Because of its high versatility and its expansion capability, the CL-5100 ... |
.jpg)
|
CL-10B FIRE ALARM SYSTEM TRAINER w/5-WAY BINDING POSTS52456BThe ConsuLab CL-10B is a fire alarm system trainer on a wall-mounted panel. It is built so that students can start, service and inspect different circuits. The OEM components are mounted on the ... |
.jpg)
|
CL-10T FIRE ALARM SYSTEM TRAINER w/SCREW TERMINALS_52456The ConsuLab CL-10T is a fire alarm system trainer on a wall-mounted panel. It is built so that students can start, service and inspect different circuits. The OEM components are mounted on the ... |
|
CL-10SM FIRE ALARM SYSTEM WIRING TRAINER92751The ConsuLab CL-10SM is a fire alarm system wiring trainer mounted on panel. It is built so that students can install, wire and start different circuits. The OEM components can be connected... |
|
CL-11B NURSE CALL SYSTEM TRAINER w/5-WAY BINDING POSTS52341BThe ConsuLab CL-11B is a nurse call system trainer on a wall-mounted panel. It is built so that students can start, service and inspect different circuits. The OEM components are mounted on the ... |
.jpg)
|
CL-11T NURSE CALL SYSTEM TRAINER w/SCREW TERMINALS_52341The ConsuLab CL-11T is a nurse call system trainer on a wall-mounted panel. It is built so that students can start, service and inspect different circuits. The OEM components are mounted on the ... |
|
CL-11SM NURSE CALL SYSTEM WIRING TRAINER92752The ConsuLab CL-11SM Nurse Call System Wiring Trainer can be designed from any application or component of your choice to meet your needs in the field of residential and commercial fire alarm sy... |
.jpg)
|
CL-20B SECURITY INTRUSION SYSTEM TRAINER w/5-WAY BINDING POSTS_52457VMThe ConsuLab CL-20B is a security intrusion system trainer on a wall-mounted panel. It is built so that students can start, service and inspect different circuits. The OEM components are mounted... |
.jpg)
|
CL-20T SECURITY INTRUSION SYSTEM TRAINER WITH SCREW TERMINALS52457The ConsuLab CL-20T is a security intrusion system trainer on a wall-mounted panel. It is built so that students can start, service and inspect different circuits. The OEM components are mo... |
.jpg)
|
CL-20SM SECURITY INTRUSION SYSTEM WIRING TRAINER92753The ConsuLab CL-20SM Security Intrusion System Wiring Trainer can be designed from any application or component of your choice to meet your needs in the field of residential and commercial secur... |
.jpg)
|
CL-21B INTERCOM SYSTEM TRAINER WITH 5-WAY BINDING POSTS_52465VMThe ConsuLab CL-20B is a security intrusion system trainer on a wall-mounted panel. It is built so that students can start, service and inspect different circuits. The OEM components are mounted... |
|
CL-21T INTERCOM SYSTEM TRAINER WITH SCREW TERMINALS52465The ConsuLab CL-21 is an intercom system trainer on a wall-mounted panel. It is built so that students can start, service and inspect different circuits. OEM components mounted on the panel. |
.jpg)
|
CL-21SM INTERCOM SYSTEM WIRING TRAINER92754The ConsuLab CL-21SM Intercom System Wiring Trainer can be designed from any application or component of your choice to meet your needs in the field of residential and commercial intercom system... |
|
CL-1565 HOME AUTOMATION TRAINER52967The ConsuLab CL-1565 trainer is an intelligent control lighting system that permits to demystify the home automation technology by using radio frequency. This evolving trainer includes a one-tou... |
|
CL-1700SM RESIDENTIAL & COMMERCIAL ELECTRIC WIRING TRAINER52765The CL 1700SM Residential and Commercial Electrical Wiring Trainer is double-sided and designed to teach and experiment in the field of residential and commercial electricity, and as w... |
|
CL-30 Industrial Transformers - 60 Hz50001The ConsuLab CL-30 trainer deals with the principles of transformers, the different types and their applications. There is an emphasis on transformer characteristics and three phase connection m... |
.jpg)
|
CL-1661 Power Electronics Trainer52050The CL-1661 trainer was designed to help students learn power electronics. It comes in a two section sturdy cabinet. Each of these sections comprises standard components mounted on Modupone... |
|
CL-1900 Intro to Electricity and Electronics - 60Hz50315The ConsuLab CL-1900 Intro to Electricity & Electronics trainer is intended to provide a course of basic experiments dealing with the production and the use of electrical energy. Students wh... |
|
CL-1910 Basic Electricity - 60Hz50622The ConsuLab CL-1910 Basic Electricity trainer has been designed as an aid in teaching electricity while working through a set of introductory experiments. All the experimental compone... |
.jpg)
|
CL-1950 Industrial Control Circuits - 60Hz50322The ConsuLab CL-1950 Industrial Control Circuits trainer has been specially designed as an aid to teach the principles of electric motor control circuits and solid-state industrial con... |
|
CL-9260 SERIES SOLID-STATE CONTROL CIRCUITS52485The CL-9260 Series, Solid-State Control Circuits, has been designed to help teach solid-state control systems. The trainer allows the student to learn basic principles of electronics s... |
.jpg)
|
CL-1661-50 Power Electronics Trainer52546The CL-1661-50 trainer was designed to help students learn power electronics. It comes in a two section sturdy cabinet. Each of these sections comprises standard components mounted on Modup... |
.jpg)
|
CL-1900-50 Intro to Electricity and Electronics - 50Hz50620The ConsuLab CL-1900-50 Intro to Electricity & Electronics trainer is intended to provide a course of basic experiments dealing with the production and the use of electrical energy. Students... |
|
CL-1910-50 Basic Electricity - 50Hz50319The ConsuLab CL-1910-50 Basic Electricity trainer has been designed as an aid in teaching electricity while working through a set of introductory experiments. All the experimental comp... |
.jpg)
|
CL-9260-50 SERIES SOLID-STATE CONTROL CIRCUITS53086The CL-9260-50 Series, Solid-State Control Circuits, has been designed to help teach solid-state control systems. The trainer allows the student to learn basic principles of electronic... |
|
CL-162 Regulated DC Power Supply52428The ConsuLab CL-162 power supply is used for DC experiments. It is equipped with voltage selector, overload and ON/OFF lamp indicators. This power supply is regulated at lower than 0,5%. |
|
CL-1544 Programmable Logic Controller50316Do you want your students trained to meet the needs fo the automation industry? If so, then consider integrating the Programmable Logic Controller into your training programs. Based mainly on in... |
|
ED-7000 Basic Instrumentation and Control TrainerED-7000The Basic Instrumentation and Control Trainer was developed so as to enable students to practice the notions of instrumentation, regulation, control and automation of continuous proces... |
|
ED-8000 Advanced Instrumentation and Control Trainer52798The Advanced Instrumentation and Control Trainer was developed so as to enable students to practice the notions of instrumentation, regulation, control and automation of continuous pro... |
|
CL-425 Power Analyzer - 50/60 Hz50017The unit is a high-precision power analyzer with graphical display. It includes a digital multimeter that is configured to provide three phase measurements with harmonic analysis of basic curren... |
.jpg)
|
CL-1718 Electrical Installation Troubleshooting - 60 Hz52825The ConsuLab CL-1718 is designed for the electric motor circuit troubleshooting tasks. The trainer consists of all industrial components required to complete lab experiments, one (1) manual faul... |
.jpg)
|
CL-1560 Basic Industrial Control System50304The CL-1560 Double-sided Basic Industrial Control System is used to demonstrate the method of controlling industrial electronic circuits by using relays and contacts. The trainer is built w... |
.jpg)
|
CL-1950-50 Industrial Control Circuits - 50Hz50623The Consulab CL-1950-50 Industrial Control Circuits trainer has been specially designed as an aid to teach the principles of electric motor control circuits and solid-state industrial ... |
.jpg)
|
CL-30-50 Industrial Transformers - 50 Hz50329The ConsuLab CL-30-50 trainer deals with the principles of transformers, the different types and their applications. There is an emphasis on transformer characteristics and three phase connectio... |
|
U-101 Unitec DC Machine Refurbishing52124FRefurbishing your old-version Unitec DC Machine is a cost-effective alternative to replacing costly equipment. Consulab can refurbish your used machines, often for a fraction of the replace... |
|
U-102 Unitec Synchronous Machine Refurbishing52125FRefurbishing your old-version Unitec Synchronous Machine is a cost-effective alternative to replacing costly equipment. Consulab can refurbish your used machines, often for a fraction of th... |
|
U-103 Unitec Squirrel Cage Machine Refurbishing52126FRefurbishing your old-version Unitec Squirrel Cage Induction Machine is a cost-effective alternative to replacing costly equipment. Consulab can refurbish your used machines, often for a fr... |
|
U-104 Unitec Wound Rotor Induction Machine Refurbishing52127FRefurbishing your old-version Unitec Wound Rotor Induction Machine is a cost-effective alternative to replacing costly equipment. Consulab can refurbish your used machines, often for a frac... |
|
U-211 Unitec Eddy Current Brake Refurbishing52134FRefurbishing your old-version Unitec Eddy Current Brake is a cost-effective alternative to replacing costly equipment. Consulab can refurbish your used machines, often for a fraction of the... |
|
U-401 Unitec Combined Load Bank Refurbishing52138FRefurbishing your old-version Unitec Combined Load Bank is a cost-effective alternative to replacing costly equipment. Consulab can refurbish your used machines, often for a fraction of the... |
|
U-108 Unitec Machines Flexible Coupler52207The Flexible Coupler is used for connecting two Unitec machine shafts during lab experiments. The coupler is designed so as to absorb mechanical shocks and does not slip when the ... |
|
U-203 Unitec Contactless Torque Meter Refurbishing52733FRefurbishing your old-version Unitec Contactless Torque Meter is a cost-effective alternative to replacing costly equipment. Consulab can refurbish your used machines, often for a fraction ... |
.jpg)
|
CL-140-50 Wye-delta Reduced Voltage Starter - 50 Hz50369The trainer is a Wye-delta Reduced Voltage Starter equipped with thermal protection facilities, a start-stop push-button station and two pilot lamps indicating respectively the su... |
|
|
CL-140-50 Wye-delta Reduced Voltage Starter - 50 Hz50369_The trainer is a Wye-delta Reduced Voltage Starter equipped with thermal protection facilities, a start-stop push-button station and two pilot lamps indicating respectively the su... |
.jpg)
|
CL-100 Rotary Machines Trainer - 1/3hp (250W) - 60Hz50016The ConsuLab 1/3hp-250W rotary machines trainer is intended as a teaching aid for a course on AC/DC motors and generators. The Consulab modular units are portable and totally enclosed. Work... |
|
CL-1133-50 Two-speed Starter - 1/3hp (250W) - 50 Hz52805The ConsuLab CL-1133-50 is used to start multi-speed motors with windings divided into parts for speed change. The trainer is equipped with thermal protection, low-stop-high push-butto... |
.jpg)
|
CL-1130-50 Part Winding Starter - 50 Hz52913The CL-1130-50 is a part winding starter used for motors of which two windings are connected in parallel for lower voltage requirements and two in series for higher voltage. The starter is ... |
.jpg)
|
CL-1131-50 Soft Starter - 50 Hz52914The ConsuLab CL-1131-50 is used to start asynchronous motors with no current inrush to limit the starting current and provide with speed change.The trainer is equipped with an Allen-Bradley... |
.jpg)
|
CL-133-50 AC Magnetic Starter for 3 hp (2.2 kW) - 50 Hz50360The ConsuLab CL-133-50 is a three phase magnetic starter for 3hp (2.2 kW) that is used to teach AC motor control and start motors with higher power and control them at distance. The starter is e... |
.jpg)
|
CL-134-50 Three Phase Magnetic Starter for 1/3 hp (250 W) - 50 Hz50361The ConsuLab CL-134-50 is a three phase magnetic starter for 1/3 hp (250 W) that is used to teach AC motor control and start motors with higher power and control them at distance. The starter is... |
|
CL-135-50 Three Phase Synchronous Motor Starter - 50 Hz50363The ConsuLab CL-135-50 is a starter that can be used to start any synchronous motor even at full load. It is equipped with thermal protection, a start-stop push-button station and two pilot... |
.jpg)
|
CL-138-50 Resistor Reduced Voltage Starter - 50 Hz50367The ConsuLab CL-138-50 is a reduced-voltage three phase starter that uses one or many resistors in series to start a motor to obtain given torque measures or limited current values. It is equipp... |
|
CL-133 AC Magnetic Starter for 3 hp (2.2 kW) - 60 Hz50040The ConsuLab CL-133 is a three phase magnetic starter for 3hp equipement that is used to teach AC motor control and start motors with higher power and control them at distance. The starter is eq... |
|
CL-134 Three Phase Magnetic Starter for 1/3 hp (250 W) - 60 Hz50041The ConsuLab CL-134 is a three phase magnetic starter for 1/3 hp (250 W) that is used to teach AC motor control and start motors with higher power and control them at distance. The starter is eq... |
|
CL-135 Synchronous Motor Starter - 60 Hz50043The ConsuLab CL-135 is a starter that can be used to start any synchronous motor even at full load. It is equipped with thermal protection, a start-stop push-button station and two pilot lamps i... |
|
CL-138 Resistor Reduced Voltage Starter - 60 Hz50047The ConsuLab CL-138 is a reduced-voltage three phase starter that uses one or many resistors in series to start a motor to obtain given torque measures or limited current values. It is equipped ... |
|
CL-139 Autotransformer Reduced Voltage Starter - 60 Hz50048The ConsuLab CL-139 is an autotransformer reduced voltage starter for 1/3 hp (250 W) that is used to start squirrel cage motors that require limited current and reduced voltage at acceleration. ... |
|
CL-140 Wye-delta Reduced Voltage Starter - 60 Hz50049The ConsuLab CL-140 Wye-delta Reduced Voltage Starter is used to start a motor having its six windings connected in wye for reducing voltage and in delta for increasing it. The starter is equipp... |
|
CL-1132 Rotor-resistance Starter - 60 Hz52804The trainer is a Rotor-resistance Starter equipped with thermal protection facilities, a start-stop push-button station and two pilot lamps indicating respectively the supply, the... |
|
CL-1131 Soft Starter - 60 Hz52803The ConsuLab CL-1131 is used to start asynchronous motors with no current inrush to limit the starting current and provide with speed change.The trainer is equipped with an Allen-Bradley SMC-3 s... |
|
CL-1130 Part Winding Starter - 60 Hz52802The CL-1130 is a part winding starter used for motors of which two windings are connected in parallel for lower voltage requirements and two in series for higher voltage. The starter is equipped... |
.jpg)
|
CL-1133 Multi-speed Starter - 1/3hp (250W) - 60 Hz52916The ConsuLab CL-1133 is used to start multi-speed motors with windings divided into parts for speed change. The trainer is equipped with thermal protection, low-stop-high push-button and two (2)... |
.jpg)
|
CL-1132-50 Rotor-resistance Starter - 50 Hz52915The trainer is a Rotor-resistance Starter equipped with thermal protection facilities, a start-stop push-button station and two pilot lamps indicating respectively the supply, the... |
.jpg)
|
CL-100-50 Rotary Machines Trainer - 1/3hp (250W) - 50Hz50340The ConsuLab 1/3hp-250W rotary machines trainer is intended as a teaching aid for a course on AC/DC motors and generators. The Consulab modular units are portable and totally enclosed. Work... |
.jpg)
|
CL-139-50 Autotransformer reduced voltage starter - 50 Hz50368The ConsuLab CL-139-50 is an autotransformer reduced voltage starter for 1/3 hp (250 W) that is used to start squirrel cage motors that require limited current and reduced voltage at acceleratio... |
|
CL-214-50 Multi-excitation DC Machine - 50 Hz50407The CL-214 Multi-excitation Direct Current Machine is the perfect tool for teaching the principles of a DC motor/generator with multi-excitation. It can be used as a motor or generator in s... |
.jpg)
|
CL-214 Multi-excitation DC Machine - 60 Hz50086The CL-214 Multi-excitation Direct Current Machine is the perfect tool for teaching the principles of a DC motor/generator with multi-excitation. It can be used as a motor or generator in series... |
|
CL-232-01 Electrodynamometer - 60 Hz50098The CL-232-01 Electrodynamometer is in fact a 2-pole DC machine that can be used to teach principles in operating direct current motor and generator. It can also be configured in ... |
.jpg)
|
CL-232-01-50 Electrodynamometer - 50 Hz50419The electrodynamometer is a bipolar DC machine that can be used to teach principles in operating direct current motors and generators. It can also be configured in series, compound and shunt&nbs... |
|
CL-1450 Transmission Line - 60Hz50308The Transmission Lines traines clearly demonstrates the most important features and specifications of transmission lines used in electrical energy. Energy losses in the form of heat and vol... |
.jpg)
|
CL-151-1-50 SCR Speed Controller - 50 Hz50383The SCR Direct Current Motor Speed Controller allows students to study the operation of a silicon-controlled rectifier used in motor speed control experiments. The power circuit is protecte... |
.jpg)
|
CL-152-50 Three Phase Rheostat Unit - 50 Hz50384The Three Phase Rheostat Unit includes three adjustable single-phase rheostats mounted on the same shaft and connected in wye. The main function of rheostats in a control system is to&... |
|
CL-125-50 Synchronizing Unit - 50 Hz50355The synchronizing unit is used in teaching electrical technology where a synchronizing switch is required for alternator synchronization. Following the connection of the synchroni... |
.jpg)
|
CL-122 Synchronizing Unit - 60 Hz50032The synchronizing unit is used in teaching electrical technology where a synchronizing switch is required for alternator synchronization. Following the connection of the synchroni... |
.jpg)
|
CL-125 Synchronizing Unit - 60 Hz50035The synchronizing unit is used in teaching electrical technology where a synchronizing switch is required for alternator synchronization. Following the connection of the synchroni... |
|
CL-150 Variable Frequency Drive - 50/60 Hz50060Providing users with a powerful motor speed control in a compact, space saving design, the Variable Frequency Drive is the smallest and most cost effective VFD trainer. Ideal for machine le... |
.jpg)
|
CL-151-1 SCR Speed Controller - 60 Hz50062The ConsuLab CL-151-1 SCR Direct Current Motor Speed Controller allows students to study the operation of a silicon-controlled rectifier used in motor speed control experiments. The power c... |
.jpg)
|
CL-152 Three Phase Rheostat Unit - 60 Hz50063The Three Phase Rheostat Unit includes three adjustable single-phase rheostats mounted on the same shaft and connected in wye. The main function of rheostats in a control system is to&... |
|
CL-215-2 Variable Speed Drive Motor - 60 Hz52728-2The CL-215-2 trainer is a variable speed drive motor that includes a squirrel cage three phase motor and an AC drive with single phase feed-in. Controls are located on the front panel.... |
|
CL-247 Stepper Motor - 50/60 Hz52153The trainer is a bipolar two-pole stepper motor of hybrid technology that is equipped with a 200-teeth rotor with step angle of 1.8 degrees. Microsteps can be generated using new technology... |
|
CL-246 Magnetic Particle Brake - 50/60 Hz52118Mounted on the test bench, the magnetic particle brake can be coupled within seconds to any Consulab 1/3hp rotary machines to establish the load of a machine. It is equipped with a&nbs... |
.jpg)
|
CL-1718-50 Electrical Installation Troubleshooting - 50 Hz52165The ConsuLab CL-1718 is designed for the electrical installation troubleshooting tasks. The training panel consists of: All industrial components required to complete lab experiments; One (1) fa... |
.jpg)
|
CL-240 Mechanical Load Mounting Base50424The mounting base is made from rigid black laminate and is equipped with carefully spaced mounting holes to ensure safe connections. It is used to hold the units included in the ConsuL... |
.jpg)
|
CL-238 Centrifugal Contacts50422The centrifugal contacts are loaded on a spring board installed on the coupling shaft, and is designed to demonstrate the braking of motor. The brake is controlled by a contact th... |
.jpg)
|
CL-311-50 Variable Resistive Load Unit - 50 Hz50433The trainer can be used either as a single or three phase variable resistive load bank, or to teach and experiment the Ohm’s law, as well the basic principles of R-L and R-L... |
.jpg)
|
CL-312-50 Variable Inductive Load Unit - 50 Hz50434The trainer can be used either as a single or three phase variable inductive load bank, or to teach and experiment the inductors, and the basic principles of R-L and R-L-C circuit... |
.jpg)
|
CL-313-50 Variable Capacitive Load Unit - 50 Hz50435The trainer can be used either as a single or three phase variable capacitive load bank, or to teach and experiment the capacitors, and the basic principles of R-L and R-L-C circuits o... |
.jpg)
|
CL-231 Prony Brake50097The Prony Brake provides the possibility to mechanically load a motor to determine its load characteristics in experiments. The Prony brake is also useful when making tests with a... |
.jpg)
|
CL-311 Variable Resistive Load Unit - 60 Hz50112The trainer can be used either as a single or three phase variable resistive load bank, or to teach and experiment the Ohm’s law, as well the basic principles of R-L and R-L... |
.jpg)
|
CL-312 Variable Inductive Load Unit - 60 Hz50114The trainer can be used either as a single or three phase variable inductive load bank, or to teach and experiment the inductors, and the basic principles of R-L and R-L-C circuit... |
.jpg)
|
CL-313 Variable Capacitive Load Unit - 60 Hz50115The trainer can be used either as a single or three phase variable capacitive load bank, or to teach and experiment the capacitors, and the basic principles of R-L and R-L-C circuits o... |
.jpg)
|
CL-413 Three Phase Wattmeters - 60 Hz50129The Three Phase Analog Wattmeters consist of two 300W meters wired together to measure the real power in three phase systems. Switches are provided to invert negative readings. The&nbs... |
|
CL-418 Three Phase Wattmeter-Varmeter - 60 Hz50134The Three Phase Wattmeter/Varmeter consists of two 440-W/VAR meters that are connected so as to allow students to measure active and reactive power in a three phase circuit. The unit has two swi... |
|
CL-412-50 Single Phase Analog Wattmeter - 50 Hz50448The trainer consists of one (1) analog wattmeter, 0-750 W, designed to read the active power in single phase circuits. Pre-wired voltage and current inputs. Stackable and portable half-size... |
.jpg)
|
CL-413-50 Three Phase Analog Wattmeters - 50 Hz50449The Three Phase Analog Wattmeters consist of two 300W meters wired together to measure the real power in three phase systems. Switches are provided to invert negative readings. The&nbs... |
|
CL-412 Single Phase Wattmeter - 60 Hz50128The ConsuLab CL-412 trainer consists of one (1) analog wattmeter, 0-750 W, designed to read the active power in single phase circuits. Pre-wired voltage and current inputs. Stackable and po... |
|
CL-419 Phase Meter - 60 Hz50135The phase meter is used to teach how to measure phase angles between two different output signals. The input signal is a reference for the unit and two indicating lights display the negative or ... |
.jpg)
|
CL-420 DC Voltmeter/Ammeters - 60 Hz50136The DC Analog Voltmeter/Ammeter trainer is designed to be used with other ConsuLab units in electrical engineering measurements for motor and generator experiments. The analog met... |
.jpg)
|
CL-421 AC Ammeters - 50/60 Hz50137The trainer includes three (3) analog ammeters for reading alternative current. Each ammeter has four (4) reading scales that are adapted to measure the current in experiments wit... |
.jpg)
|
CL-422 AC Voltmeters - 60 Hz50138The trainer iincludes three (3) analog voltmeters for reading AC voltages. Each voltmeter has two (2) reading scales adapted to measure the voltage in experiments with rotary mach... |
.jpg)
|
CL-1003 Handheld Tachometer50282The Handheld Tachometer provides a convenient, accurate way of measuring rotary speeds on all types of machinery. Used in non-contacting measurements, the tachometer optically detects ... |
.jpg)
|
CL-420-50 DC Analog Voltmeter/Ammeter - 50 Hz50456The DC Analog Voltmeter/Ammeter trainer is designed to be used with other ConsuLab units in electrical engineering measurements for motor and generator experiments. The analog met... |
.jpg)
|
CL-422-50 AC Analog Voltmeters - 50 Hz50458The trainer iincludes three (3) analog voltmeters for reading AC voltages. Each voltmeter has two (2) reading scales adapted to measure the voltage in experiments with rotary mach... |
|
CL-418-50 Three Phase Wattmeter-Varmeter - 50 Hz50454The Three Phase Wattmeter/Varmeter consists of two 440-W/VA meters that are connected so as to allow students to measure active and reactive power in a three phase circuit. The unit has two swit... |
|
CL-419-50 Phase Meter - 50 Hz50455The Phase Meter is used to teach how to measure phase angles between two different output signals. The input signal is a reference for the unit and two indicating lights display the negative or ... |
.jpg)
|
CL-141-50 Variable Three Phase AC Supply - 50 Hz50370This unit is useful to power any Consulab units requiring variable or fixed AC voltage either for single or three phase network. This unit is also used to teach the principle of v... |
|
CL-143-50 Variable Three Phase AC Supply - 50 Hz50372The Variable Three Phase AC Power Supply is housed in a totally enclosed, stackable, and portable half-size modular unit. Connections can be made between the three-phase power sup... |
.jpg)
|
CL-145-50 Single Phase AC/DC Supply - 50 Hz50374The trainer is a single phase power supply unit used for various experiments requiring variable or fixed AC and DC voltages. The module is housed into a halfsize cabinet which is ... |
.jpg)
|
CL-146-50 Rectifier Unit - 50 Hz50375The Three Phase Rectifier Unit can be used to power various Consulab units requiring variable or fixed DC voltage. This unit is powered by the Three Phase AC Power Supply (50370). The ... |
|
CL-148-50 AC/DC Rectifying Unit - 50 Hz50378The AC/DC Rectifying Unit can be used to teach the principles of variable autotransformers and rectifiers. This rectifier requires variable or fixed AC/DC voltages. The unit is co... |
|
CL-141 Variable Three Phase AC Supply - 60 Hz50051This unit is useful to power any Consulab units requiring variable or fixed AC voltage either for single or three phase network. This unit is also used to teach the principle of v... |
|
CL-143 Variable Three Phase AC Supply - 60 Hz50052The Variable Three Phase AC Power Supply is housed in a totally enclosed, stackable, and portable half-size modular unit. Connections can be made between the three-phase power sup... |
|
CL-145 Single Phase AC/DC Supply - 60 Hz50054The trainer is a single phase power supply unit used for various experiments requiring variable or fixed AC and DC voltages. The module is housed into a halfsize cabinet which is ... |
|
CL-146 Rectifier Unit - 60 Hz50055The Three Phase Rectifier Unit can be used to power various Consulab units requiring variable or fixed DC voltage. This unit is powered by the Three Phase AC Power Supply (50051). The ... |
|
CL-148 Rectifying Unit - 60 Hz50057The Rectifying Unit can be used to teach the principles of variable autotransformers and rectifiers. This rectifier requires variable or fixed AC/DC voltages. The unit is compatib... |
|
CL-163 DOUBLE AC POWER SUPPLY53055The ConsuLab CL-163 AC Power Supply is encased in a safe and portable enclosure. The wiring terminals are color-coded and can be used with 4mm jumper wires and banana plugs. The power suppl... |
.jpg)
|
CL-221-50 Split-phase Induction Motor - 50 Hz50408The trainer is designed to teach the principles of the auxiliary resistive phase motor or split phase motor. In this type of motor, there is no capacitor. The phase shift needed to start the mot... |
.jpg)
|
CL-223-50 Capacitor-start Motor - 50 Hz50410The Capacitor-start Motor is designed to teach the principles of a split-phase motor equipped with a starting capacitor specially built for this type of motor. A centrifugal switch disconne... |
.jpg)
|
CL-224-50 Capacitor-run Motor - 50 Hz50411This trainer is a single-phase unit that can be used to teach the principles of the capacitor-run motor. The main winding, auxiliary winding and the capacitor of the capacitor-run... |
.jpg)
|
CL-225-50 Universal Motor - 50 Hz50412The Universal Motor works similar to the DC series motor and can be operated in any household AC frequency or DC current. While in load high speed and power can be output through this&... |
|
CL-221 Split-phase Induction Motor - 60 Hz50087The trainer is designed to teach the principles of the auxiliary resistive phase motor or split phase motor. In this type of motor, there is no capacitor. The phase shift needed to start the mot... |
.jpg)
|
CL-223 Capacitor-start Motor - 60 Hz50089The Capacitor-start Motor is designed to teach the principles of a split-phase motor equipped with a starting capacitor specially built for this type of motor. A centrifugal switch dis... |
.jpg)
|
CL-224 Capacitor-run Motor - 60 Hz50090This trainer is a single-phase unit that can be used to teach the principles of the capacitor-run motor. The main winding, auxiliary winding and the capacitor of the capacitor-run... |
.jpg)
|
CL-225 Universal Motor - 60 Hz50091The Universal Motor works similar to the DC series motor and can be operated in any household AC frequency or DC current. While in load high speed and power can be output through this&... |
.jpg)
|
CL-228-50 Single Phase Two-speed Motor - 50 Hz52454The trainer is a three phase two-speed induction motor that uses poles to change speed in the motor. Two different speeds are available according to the connection made. The windings of this thr... |
.jpg)
|
CL-314-50 Single Phase Transformer - 50 Hz50436The Single Phase Transformer is designed to demonstrate the applications and characteristics of transformers. It can be also used for experimentation with the rectifier module. It... |
.jpg)
|
CL-315-50 Three Phase Transformer - 50 Hz50437The Three Phase Transformer provides three identical primary and secondary windings. The trainer is designed to teach principles of single, two and three phase transformer connections and to car... |
.jpg)
|
CL-314 Single Phase Transformer - 60 Hz50116The Single Phase Transformer is designed to demonstrate the applications and characteristics of transformers. It can be also used for experimentation with the rectifier module. It... |
|
CL-315 Three Phase Transformer - 60 Hz50117The Three Phase Transformer provides three identical primary and secondary windings. The trainer is designed to teach principles of single, two and three phase transformer connections and to car... |
.jpg)
|
CL-211-50 Synchronous Machine - 50 Hz50403The Synchronous Machine runs at constant speed independently of the load. The synchronous speed directly depends on the current frequency and on the number of motor poles. The main&nbs... |
.jpg)
|
CL-212-50 Wound-rotor Induction Machine - 50 Hz50404This machine works as either a motor or an alternator. The rotor consists of three phase windings connected to rings that are mounted on the shaft. Brushes connected to the rings allow... |
.jpg)
|
CL-213-50 Squirrel Cage Induction Machine w/4 Pole Windings - 50 Hz50405This machine is a three-phase squirrel cage induction motor. The B design of the machine makes it convenient for most applications. It can be used as either a motor or generator. The 4... |
.jpg)
|
CL-228-50 Three Phase Two-speed Motor - 50 Hz50415The trainer is a three phase two-speed induction motor that uses poles to change speed in the motor. Two different speeds are available according to the connection made. The windings of this thr... |
.jpg)
|
CL-211 Synchronous Machine - 60 Hz50082The ConsuLab CL-211 Synchronous Machine runs at constant speed independently of the load. The synchronous speed directly depends on the current frequency and on the number of motor pol... |
.jpg)
|
CL-212 Wound-rotor Induction Machine - 60 Hz50083The ConsuLab CL-212 machine works as either a motor or an alternator. The rotor consists of three phase windings connected to rings that are mounted on the shaft. Brushes connected to ... |
.jpg)
|
CL-213 Squirrel Cage Induction Machine - 60 Hz50084This machine is a three-phase squirrel cage induction motor. The B design of the machine makes it convenient for most applications. It can be used as either a motor or generator. The t... |
|
CL-228 Two-speed Motor - 60 Hz50094The CL-228 two-speed motor (Dahlander-type motor) uses consequent poles to change speed. Both speeds at variable torque can be obtained according to the wiring connection. The motor winding... |
|
MAS-DEM Dissectable Machine53128The ConsuLab MAS-DEM is a three-phase asynchronous squirrel-cage motor mock-up that can be assembled and disassembled depending on needs. This product is presented in a case containing the follo... |
.jpg)
|
CL-1007 Flexible Rubber Coupling50286The Flexible Rubber Coupling consists of a flexible sleeve made of thermoplastic rubber. Easy to install. When coupling two ConsuLab machines, the sleeve locks safely into both sh... |
.jpg)
|
CL-1010-00 Double Coupling Base50289Rigid laminated wooden base that is designed to couple two (2) ConsuLab rotary machines. Equipped with wing screw anchors to safely bolt the machines before the coupling experimen... |
.jpg)
|
CL-1012E Jumper Wires w/Banana Plugs52693The ConsuLab CL-1012E is a set of highly flexible jumper wires used for safety sockets, with insulation in PVC and stackable 4mm banana plugs with rigid insulating sleeve on both ends that ... |
.jpg)
|
LV-330 MOTORCYCLE ELECTRONIC FUEL INJECTION SYSTEM TRAINER52795The ConsuLab LV-330 trainer includes a complete OEM motorcycle electronic fuel injection system and engine management. It can be based on any model of your choice and designed to incorpora... |
|
LV-140C Custom Motorcycle Engine Trainer53232Safety, repeatability, space savings, fault insertion, testing and measurements, these are all part of the LV-140C solution that ConsuLab now offers to your motorcycle programs. Using the same t... |
|
LV-1918 MOTORCYCLE LIGHTING AND ACCESSORY SYSTEMS TRAINER53166The LV-1918 Motorcycle Lighting and Accessory Systems Trainer contains OEM system components (application varies) mounted on modular plastic plates – called Moduponents® – w... |
.jpg)
|
LV-500 MOTORCYCLE LIGHTING & CHARGING SYSTEM TRAINER52796The ConsuLab LV-500 trainer includes a complete OEM motorcycle lighting and charging system. A ConsuLab motorcycle lighting & charging system trainer can be based on any model of your choice... |
.jpg)
|
AB-710 Front auto body trainer - Ford Focus52923The ConsuLab AB-710 Front Auto Body trainer includes the hood and both front fenders. This non-foldable trainer has been designed for auto body repair and refinishing classes. |
.jpg)
|
AB-720 Dual door trainer - non powered52674The ConsuLab AB-720 Dual Door Trainer includes the front doors and mirrors. This trainer is designed for auto body and refinishing classes. Application: GM Cobalt. |
|
AB-720E Dual door trainer with power windows53148The ConsuLab AB-720E trainer includes the front doors, mirrors and power windows. This trainer is designed for auto body and refinishing classes. Application: GM Cobalt. |
.jpg)
|
AB-740 Side auto body trainer52697The ConsuLab AB-740 Side Auto Body trainer includes a front fender, door(s) and rear quarter panel. This trainer has been designed for auto body and refinishing classes and can be made on any mo... |
|
CL-1991 Air Conditioning System Control52345The CL-1991 Air Conditioning System Control trainer has been designed as a training aid to teach A/C system controllers. Because of its high versatility and its expansion capability, t... |
|
MD-5000 SERIES GAS TECHNOLOGY TRAINER52702The ConsuLab MD-5000 Series is a custom trainer that allows students to be initiated into the basics of electricity and become familiar with monitoring and control devices used in the industry. ... |
.jpg)
|
HYDRAULIC STEERING & HYDROSTATIC TRANSMISSION W/TROUBLESHOOTINGFP-MF300-VCLS-TSThe FP-MF300-VCLS-TS simulator is a “lean, mean troubleshooting teaching machine.” It has the same superb capability as the FP-MF300-VCLS model with the added benefit of making almos... |
|
Pump Cavitation TrainerFP-MF200-CAVThe FP-MF200-CAV simulator is the most advanced trainer in the world for teaching students everything they need to know about cavitation, its common causes, and its devastating effect on a hydra... |
|
Single-sided Basic Through Advanced Hydraulics TrainerFP-MF102S-HThe FP-MF102S-H Single-sided Basic Through Advanced Hydraulics Trainer has its unique ability to replicate a fully functional industrial or mobile hydraulic system, which is capable of operating... |
.jpg)
|
Double-sided Basic Through Advanced Hydraulics TrainerFP-MF102D-HThe FP-MF102D-H Double-sided Basic Through Advanced Hydraulics Trainer has its unique ability to replicate a fully functional industrial or mobile hydraulic system, which is capable of operating... |
|
Single-sided Hydraulics Trainer with TroubleshootingFP-MF102S-H-TSThe FP-MF102S-H-TS Single-sided Hydraulics Trainer has the same superb capability as the FP-MF102S-H model for teaching a course in basic through advanced hydraulics. However, an extensive compo... |
.jpg)
|
Double-sided Hydraulics Trainer with TroubleshootingFP-MF102D-H-TSThe FP-MF102D-H-TS Double-sided Hydraulics Trainer has the same superb capability as the FP-MF102D-H model for teaching a course in basic through advanced hydraulics. However, an extensive ... |
|
Single-sided Hydraulics Trainer with Touch-screenFP-MF102S-H-TSEThe FP-MF102S-H-TSE Single-sided Hydraulics Trainer has the same impressive capability as the FP-MF102S-H and FP-MF102S-H-TS models for teaching a course in basic through advanced hydraulics.&nb... |
.jpg)
|
Double-sided Hydraulics Trainer with Touch-screenFP-MF102D-H-TSEThe FP-MF102D-H-TSE Double-sided Hydraulics Trainer has the same impressive capability as the FP-MF102D-H and FP-MF102D-H-TS models for teaching a course in basic through advanced hydraulics. In... |
|
Single-sided Basic Hydraulics TrainerFP-MF100S-BHThe FP-MF100S-BH simulator is designed to help students learn all aspects of hydraulics that includes: basic hydraulic principles and laws, how hydraulic components work,&nbs... |
|
Double-sided Basic Hydraulics TrainerFP-MF100D-BHThe FP-MF100D-BH simulator is designed to help students learn all aspects of hydraulics that includes: basic hydraulic principles and laws, how hydraulic components work, how hydraulic component... |
.jpg)
|
Hydrostatic Transmission Training SimulatorFP-MF500-HT-TSEThe MF500-HT-TSE is an instructors “dream-come-true” with respect to teaching state-of-the-art, electronically-controlled hydrostatic transmission systems - hands-on. It can even be ... |
|
Single-sided Basic Pneumatics TrainerFP-MF700S-PNThe FP-MF700S-PN trainer features a fully functional single-sided basic pneumatic system with OEM components. |
.jpg)
|
Double-sided Basic Pneumatics TrainerFP-MF700D-PNThe FP-MF700D-PN trainer features a fully functional double-sided basic pneumatic system with OEM components. |
.jpg)
|
Cutaway Double-acting Single-rod CylinderFP-DAC-CMThe FP-DAC-CM cutaway trainer is an application that can be chosen to demonstrate the operation of a hydraulic cylinder (double-acting and single-rod). This exceptional cutaway model features a ... |
|
Cutaway D08 Directional Control ValveFP-DCV-08-CMThe FP-DCV-08-CM cutaway model permits students to see exactly how the oil flows within a two-stage D08 size directional control valve with this stunning cutaway. It is also designed to hel... |
|
Cutaway Gear PumpFP-GP-CMThe FP-GP-CM cutaway trainer is an application that can be chosen to demonstrate the operation of a hydraulic gear pump. |
|
Mobile Directional Control Valve Module w/TroubleshootingFP-MDCV-CMThe FP-MDCV-CM cutaway trainer is an application that can be chosen to demonstrate the operation of a mobile directional control valve module. There is definitely more to a mobile dir... |
|
Cutaway Orbitrol Steering ValveFP-OSV-CMThe FP-OSV-CM cutaway model is identical to the orbitrol valve on FP-MF300-VCLS simulators. The orbitrol steering valve is used extensively in mobile steering applications. It rates as one ... |
|
Cutaway Pilot-operated Pressure Relief ValveFP-PORV-CMThe FP-PORV-CM cutaway trainer is an application that can be chosen to demonstrate the operation of a pilot-operated pressure relief valve that consists of two direct-operated relief valves... |
|
Cutaway Over-center Variable Displacement PumpFP-VDP-CMThe FP-VDP-CM cutaway trainer is an application that can be chosen to demonstrate the operation of a hydraulic over-center pump. This cutaway model is identical to the pump on MF300-VCLS simulat... |
|
CL-1121A CIRCUIT BOARD FOR RLC WITH AC - Version A53164AThe ConsuLab CL-1121A is a circuit board that permits students to learn how to use RLC circuits fed by alternating current. The components are mounted on the circuit board so as to view the... |
.jpg)
|
CL-1121B CIRCUIT BOARD FOR RLC WITH AC - Version B53164BThe ConsuLab CL-1121B is a circuit board that permits students to learn how to use RLC circuits fed by alternating current. The components are mounted on the circuit board so as to view the... |
.jpg)
|
CL-1121C CIRCUIT BOARD FOR RLC WITH AC - Version C53164CThe ConsuLab CL-1121C is a circuit board that permits students to learn how to use RLC circuits fed by alternating current. The components are mounted on the circuit board so as to view the... |
|
CL-1122 CIRCUIT BOARD FOR TRIAC53165The ConsuLab CL-1122 is a circuit board that permits students to learn how to use triacs. The components are mounted on the board so as to view the circuits identified by section. The main ... |
.png)
|
Diesel Aftertreatment Systems and Emissions StandardsTT1ConsuLab offers a 1-3 hour training course designed to bring instructors up-to-date on diesel aftertreatment systems and the new emission standards in effect today. This course will discus... |
|
Using the DSO in the classroom - intro and diagnosisTT2This class will demonstrate how to obtain and evaluate numerous DSO signal waveforms obtained from common engine input sensors (APP, MAF, MAP, IAT, ECT, HO2S, etc), output actuators (ignit... |
|
The future of air conditioning - R1234YF & HybridsTT3This training class discusses both existing and new refrigerants used in today’s vehicles including R1234yf. We discuss new and modified components of modern A/C systems including IH... |
|
Electronics of modern air brakes ABS ATC ESPTT5In this training session, we discuss the electrification of modern air brake systems including antilock braking systems, traction control systems, stability control systems, and much more. Using... |
.jpg)
|
Modern fuel injection systems - GDITT7In this course, we discuss the evolution past and present fuel injection systems and the impact they have had on engine combustion, emissions and fuel economy. We share best practice... |
|
ELECTRICAL DIAGNOSTIC STRATEGIES FOR TODAY’S VEHICLESTT9Vehicles today are more sophisticated than ever before. Instructors and technicians are faced with new challenges in learning new systems and methods of diagnostic strategies and routines.... |
|
CANbus multiplex systems demystifiedTT6In this course, we discuss the evolution of CAN Bus multiplex systems and explain their propagation throughout today’s vehicles. We also share best practices on how to explain the fu... |
|
Autonomous Automobiles: The Butterfly EffectTT102 hr Who will need to own a car in 2020? Whether you believe autonomous vehicles are coming to stay or not, the concept is worth discussion! In t... |
.jpg)
|
Team-Based Learning: Beyond Small GroupsTT113-4 hrs Team-Based Learning (TBL) is a strategy to transform a classroom of students into high-performance learning teams. Let's face it; career technol... |
.jpg)
|
First Day JittersTT131.5 hrs So, you made the decision that you want to quit wrenching and become an automotive instructor? Then right after the classroom keys are handed over t... |
|
Diagnosing CAN Bus at the DLCTT15This seminar will show technicians and instructors the information available at the DLC on a CAN vehicle. We will use a multi-meter, DSO and a computer-based scanner. This seminar wi... |
.jpg)
|
Teaching Ignition Theory, Diagnosis and Repair, Using a DMM and a DSOTT16This seminar will first identify the different types of ignition systems on the road. We will discuss the differences emphasizing module function, computer function, coils, and input senso... |
.jpg)
|
A hand’s On Approach to Teaching Circuit Analysis and Ohm’s LawTT17The fundamentals of electricity/electronics seem to be a stumbling block for many automotive students. This seminar will offer what may be a non-traditional method of teaching the fundamen... |
.jpg)
|
Teaching Diagnosis with a DSO (intro to DSO part 2 of 2)TT18This seminar will follow the intro to the DSO class and will have the intent of giving instructors practice in capturing and analyzing patterns, using both voltage and current waveforms. &n... |
.jpg)
|
Teaching GDI (Gas Direct Injection) Diagnosis at the DLCTT20In this seminar we will look at how a GDI system functions. We will discuss what components are common to most systems and look at fuel pump controls, injector waveforms and the use of fue... |
.jpg)
|
A New Look at Some Old Sensors – Back to the Basics!TT21This seminar will examine speed and positions sensors: how they work, why they fail, and where they are used. We will connect a DMM and a DSO to a trainer displaying live patterns and disc... |
.jpg)
|
Teaching Computer Control Using Cause and Effect RelationshipsTT22This seminar will emphasize how to teach computer control by using the cause and effect relationship present. We will use a DMM, scanner and a DSO comparing how a signal effects a computer outpu... |
.jpg)
|
The Use and Abuse of the DSOTT19A 4 hour seminar that starts on the basics of the DSO and ends with emission applications. Case studies of vehicles that were repaired and monitors set by using the information from a DSO ... |
.jpg)
|
Introduction to DSO (intro to dso part 1 of 2)TT23This class will demonstrate how to obtain and evaluate numerous DSO signal waveforms obtained from common engine input sensors (APP, MAF, MAP, IAT, ECT, HO2S, etc), output actuators (ignit... |
|
45 tips for program viabilityTT8This class gives 45 tips and strategies that offer solutions for the most common frustrations and difficulties instructors face in today’s CTE programs. This course is a must for new... |
.jpg)
|
Team Based Learning: Your Next MoveTT122-3 hrs Team-Based Learning (TBL) is an instructional strategy that has been presented in the past, but time didn’t permit helping you get started cha... |
.jpg)
|
Creative Ways to Engage StudentsTT141.5 – 2 hrs What does tomorrow's classroom even look like? Will it be one size fits all or one size fits one? What have you heard about Team-based... |
|
Maximizing ConsuLab engine benches and fault box usage in your classroom.TT4How do you challenge your students to develop their own individual engine performance diagnostic strategies using hands-on activities? Does your program have all the training vehicles you ... |
.jpg)
|
Modern Combustion TechnologiesTT24We are developing a new training session focusing on modern combustion technologies. This covers gasoline and diesel engines along with emissions and after-treatment systems. &n... |
|
W-h Meter Testing Bench - Delta ConfigurationCPN-52348The delta-configured electric meter testing bench can be used as both a power supply and a load bench. The bench allows for simulated installation and use of measurement tools such as electric c... |
|
Custom Mobile Test BenchesCPN-52535We can customize your mobile test bench with required voltages and currents, measuring instruments and other components to meet your needs. |
.jpg)
|
Custom Testing Bench Series with WorkstationCPN-064We can customize your testing bench with required voltages and currents, measuring instruments and other components to meet your needs. Fixed or mobile storage comp... |
|
Airplane Flap and Trim Control TrainerCPN-52917The Custom Airplane Flap and Trim Control Trainer is designed to demonstrate the basic principles of aircraft primary flight controls. The trainer covers three different control technologies use... |
.jpg)
|
EC-600 CUTAWAY CARCPN-52744A cutaway car can be based on any vehicle of your choice. This custom complete vehicle trainer can be designed to incorporate any vehicle system you require. |
|
Custom BMW X3 3.0L Engine BenchCPN-088
|
|
Electude courseware for EM-200-14E-EM-200-14Includes 11 practical assignment modules for a total of 9 hours of instruction.
The Electude Ignition System Trainer courseware consists of a practi... |
Testimonials
I got the half car out of the crate and working yesterday and today I had my Level 3 Electronic Climate Control diagnostics lab using it. This teaching aid is great! The workmanship and design is excellent and it is just perfect for the Level 3 curriculum, including the upcoming changes. We were fortunate that the IPro scan tool we received from the Uniselect donation communicates quite well with the Audi CAN bus system. The Audi also has the electronically controlled, clutchless compressor which is covered in our theory classes so it's a good reinforcement to be able to see it in action, manipulate it and communicate with it. I am very pleased with the quality and applicability of our ConsuLab products (including the engine/AC bench we got recently). They allow me to teach up to 8 students in great detail, whereas only one or two at a time can be involved in a full car. I am looking forward to the imminent arrival of our AC board. Thanks for your excellent insight of design and quality of manufacturing.
Prof. Thomas Brown, Centennial CollegePartners
-
Skills Canada
-
Skills Canada - Alberta
-
CAMPE
-
Skills Québec
-
Gates
-
NACAT
-
California Automotive Teachers
-
CFP de Québec
-
Diagnostic Network
-
Electude
Consulab
Consulab manufactures educational training materials adapted to meet the needs of technical and vocational schools in the fields of transportation technology electrical engineering.
Learn MoreContact
+1 (800) 567-0791 . 8pm - 5pm EST
4210 Jean-Marchand Street
Quebec City, QC . Canada, G2C 1Y6
info@consulab.com