| CL-100 |
Electrical Machines for 1/3 HP – 250 W |
 |
| The Consulab CL-100, a set of practical exercises with economically priced 1/3HP-250W electrical machines, is intended as a
teaching aid for a course on AC/DC motors and generators. The Consulab... |
|
|
| CL-300 |
Electrical Machines for 3 HP – 2.2 kW |
 |
The CL-300 is a 3-HP electrical motor/generator package, including control equipment and measuring instruments. It has been carefully designed for use in electrical engineering labor... |
|
|
| CL-135 |
Three-phase Synchronous Starter |
 |
|
The CL-135 module is a three-phase synchronous starter equipped with thermal protection, a start-stop push-button, two (2) pilot lamps indicating the starting steps of the motor and an adjustable time... |
|
|
| CL-138 |
Sator-resistance Starter |
 |
The CL-138 module is a three-phase stator-resistance starter equipped with thermal protection, a start-stop push-button, two (2) pilot lamps indicating the starting steps of the motor and... |
|
|
| CL-139 |
Autotransformer Starter |
 |
The CL-139 module is a three-phase autotransformer starter equipped with thermal protection, a start-stop push-button, two (2) pilot lamps indicating the starting steps of the motor... |
|
|
| CL-140 |
Star-delta Starter |
 |
The CL-140 module is a star-delta starter equipped with thermal protection, a start-stop push-button, two (2) pilot lamps indicating the starting steps of the motor and an adjustable time delay. The con... |
|
|
| CL-1130 |
Part-winding Starter |
 |
The CL-1130 module is a part-winding starter equipped with thermal protection, a start-stop push-button, two (2) pilot lamps indicating the starting steps of the motor and an adjustable time... |
|
|
| CL-1131 |
Soft Starter |
 |
The CL-1131 module is a soft starter equipped with an Allen-Bradley SMC-3 smart motor controller, start-stop push-button and two (2) pilot lamps indicating respectively the Supply and Ovld/Fault... |
|
|
| CL-1132 |
Rotor-resistance Starter |
 |
The CL-1132 module is a rotor-resistance starter equipped with thermal protection, start-stop push-button, two (2) pilot lamps indicating the starting steps of the motor and an adjustable time delay... |
|
|
| CL-1133 |
Multi-speed Starter |
 |
The CL-1133 module is a multi-speed starter for separate winding motor equipped with thermal protection, low-stop-high push-button and two (2) pilot lamps indicating respectively low and high... |
|
|
| CL-150 |
Variable Speed Controller with Built-in Drive |
 |
Providing users with a powerful motor speed control in a compact, space saving design, the CL-150 Variable Speed Controller with Built-in Drive is the smallest and most cost effective drive trainer. Idea... |
|
|
| CL-215 |
Variable Speed Motor with Built-in Drive |
 |
The CL-215 is a variable speed motor with a built-in drive and integrated control module that can be connected to a PC or controlled via remote control. The unit can be programmed using the included... |
|
|
| CL-246 |
Magnetic Particle Brake |
 |
Mounted on the test bench, the CL-246 can be coupled within seconds to any Consulab 1/3 HP rotating machines to establish the load of a machine. It is equipped with a magnetic particle... |
|
|
| CL-247 |
Stepper Motor Controller |
 |
The CL-247 includes a unipolar type motor, a stepper motor controller, a computer interface with DB-25 connector cable and basic software compatible with Windows. |
|
|
| CL-F765MG |
Electric Motors & Generators |
 |
When teaching motors and generators at the elementary stage, as much attention as possible should be given to practical experiments. Most of the experiments in motors and generators for this stage can be... |
|
|
| CL-900 |
Industrial Control Design & Troubleshooting |
 |
The CL-900 is a set of motor relay controls designed
with strict attention to quality, versatility, and expansion
capabilities. Due to the wide variety of motor control
types, the CL-900 enables... |
|
|
| CL-800 |
AC/DC Motor Control |
 |
The CL-800 AC/DC Motor Control training
package has been put together to perform a
series of experiments when teaching the
principles and applications of motor control
circuits. It can be used... |
|
|
| CL-83 |
Industrial Motor Control Circuits |
 |
The CL-83 trainer has been developed so that students can
assemble, wire, and connect various industrial motor
control circuits. The components are standard CEMA or
NEMA control circuits, the same as... |
|
|
| CL-1718 |
Electrical Installation Troubleshooting |
 |
The CL-1718 panel consists of:
- All industrial components required to complete lab experiments.
- One (1) fault simulator with...
|
|
|
| MAS-DEM |
Dissectible Machine |
 |
The MAS-DEM Dissectible Machine is designed to discover
and study the basics of a three-phase squirrel-cage
asynchronous machine. All the components are stored in a...
|
|
|